Spare parts be gone(updated)

randomiam · Post by **randomiam** » Thu May 10, 2012 1:58 am

This will probably be updated as more decisions are made. Local is preferred but shipping works within reason.

EJ22T Connecting rods (4) - about 180k on them. $70?
EJ22T Pistons (4)-- Not sure about the appeal of used pistons but they are intact and still usable. $40
Spectre? Cone air filter $10
Silver door handles! -- I have three for the passenger side. $10

Updated 7/24/2012
Wagon is gone!
Pulled much of what was not gone already; refer to last photo for pictures of items. I have some other stuff too.

Thesubielover · Post by **Thesubielover** » Thu May 10, 2012 11:38 am

Can I see a picture of the turbo resinator part?

batlegacy · Post by **batlegacy** » Fri May 11, 2012 12:47 am

Can I see a pic of the coffee cup mod/whole intake setup? Would you be willing to trade for: spare taillight, turbo shifter assembly, intake manifold with IAC, those are the only parts that come to mind right now...I also have a couple DIN pockets an extra radio bezel and a few other odds and ends.

PM me,
BatLegacy

randomiam · Post by **randomiam** » Fri May 11, 2012 2:07 am

Its not quite the standard idea of the coffee cup mod.

It essentially replaces part#6 and helps get rid of the resonator.. But it doesn't account for the various connections needed from the resonator and that #6 piece, so some creative plumbing was done.. Not super clear on how it worked.

Not sure I need that stuff. The tail light for the spoiler, I do need. I'll update the original post with a few things I could use.

oleman77 · Post by **oleman77** » Fri May 11, 2012 5:23 am

looking for an electric antenna. got one? Also would be interested in MAF...either PM me or email me at petetrosky@comcast.net...........pete

randomiam · Post by **randomiam** » Sat May 12, 2012 5:30 am

I could really use a new set of headbolts. ARP or OEM.. Local is best! Not really a trade per say, looking to buy outright if someone has spares nearby.

dscoobydoo · Post by **dscoobydoo** » Sun May 13, 2012 7:26 pm

Curious what the seats and door cards look like.....
If you need a spoiler light bad, I think I have one.
I have a spare EJ20G computer if you are thinking of going that route.
Also a FMIC that i picked up to use on my SS, but have not yet.

Curious on the EJ22T and its condition.

randomiam · Post by **randomiam** » Mon May 14, 2012 7:51 am

I might be interested in buying the spoiler light if its just an extra.

and uhh.. decided against getting rid of the motor & wagon. Motor is getting some seal attention & getting dropped in the wagon. I don't have the heart to part these cars.

randomiam · Post by **randomiam** » Wed May 23, 2012 4:08 pm

BUMP?

I could really use a clutch kit and clutch slave cylinder.

randomiam · Post by **randomiam** » Thu Jun 21, 2012 8:37 am

Alright time to bump this thing. I keep going wishy washy on parting this thing but we've been stealing stuff from it left and right for our other legacies so HERE WE GO:

1994 Subaru Legacy Touring Wagon
No motor, 5speed swapped (na tranny, cable setup), leather interior-- Seats do have some tear in the front, not perfect. Power steering assembly/AC system still installed and intact. Front and rear disc brakes etc, clean hood and driver side body panels in good shape.

Color is Crimson Pearl -- 1994 Exclusive color I believe.

I'm tearing this thing down and stuffing the useful parts in the garage until they sell. Will give a notice about what didn't come off the frame before its taken out. Maybe would consider a complete buy for a few hundred if interested. I need the extra driveway space.

chashiubow · Post by **chashiubow** » Fri Jun 22, 2012 3:25 am

What are the conditions of the rods and pistons? Shipping quote to 94545, please?

beatersubi · Post by **beatersubi** » Fri Jun 22, 2012 4:43 am

Interested in the trans crossmember and driveshaft.
OH, and I have a set of stock head bolts, if you're still looking.

randomiam · Post by **randomiam** » Fri Jun 22, 2012 6:27 am

PM's sent. I can probably bring some of this stuff to the BBQ on Saturday.

Thesubielover · Post by **Thesubielover** » Fri Jun 22, 2012 10:24 am

is that resinator sold? id like to see it saturday or maybe even sometime arounds seattle since we both live here.

randomiam · Post by **randomiam** » Sat Jun 23, 2012 5:43 am

I'll bring it

Thesubielover · Post by **Thesubielover** » Sat Jun 23, 2012 6:37 am

Sweet, where do you live in Seattle? How much are you looking to get for the piece?

randomiam · Post by **randomiam** » Sat Jun 23, 2012 6:45 am

I need to correct my profile. I actually live in the Federal Way area. The part? lol I don't know, $10?

Thesubielover · Post by **Thesubielover** » Sat Jun 23, 2012 7:46 am

Sure that sounds good. Are you thinking of hitting the bbq and the forum fest? Whatever the out come, we should drive down there convoy style!

randomiam · Post by **randomiam** » Wed Jun 27, 2012 2:19 am

Crap. I forgot to take some pictures of the rods/pistons. Will add some shortly.

Most of the stuff is still here. Hood/few doors/bumper and some other misc stuff will be gone tomorrow. I haven't pulled the tranny and diff etc yet. Kinda busy.

randomiam · Post by **randomiam** » Wed Jun 27, 2012 7:03 am

Stock rods:

Pistons:

I'm not the best judge of the pistons but they look like they are fine to me. The rings appear to be in decent shape and I haven't seen any issue with the ring lands. Some of them did get a little nicked by some loose oil squirter action at some point.

randomiam · Post by **randomiam** » Sun Jul 01, 2012 5:18 am

BUMP.

This stuff needs to go. Local is best and deals can be made. Let me know.

206-653-5427

randomiam · Post by **randomiam** » Wed Jul 25, 2012 12:43 am

So. This is whats left:
Ton of interior stuff. ECU, TCU, Various relays, Resurfaced flywheel, Door internal stuff, handles, Pleather seats-- some wear/tear visible, door cards.. Still have the extra motor that was blown apart with various usable parts.. Some intake manifold stuff and possibly able to spare some of the intake plumbing. Stock Turbo back exhaust including a bonus 02 Sensor, ha.

batlegacy · Post by **batlegacy** » Wed Jul 25, 2012 3:54 am

Is the spectre filter still available? Are you selling it with the coffee cup mod? If so, how much shipped to 20707?

PS. did you use the spectre inside the air box or did you discard of the stock system entirely?

PM me please,
BatLegacy

randomiam · Post by **randomiam** » Sat Aug 11, 2012 8:06 am

bump.. I suppose? link to current craigslist ad:
http://seattle.craigslist.org/skc/pts/3182928216.html

If its not listed, it might be worth asking, I have stuff I forget about. On the lookout for a clean set of wheels/certain body parts, various stuff.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Spare parts be gone(updated)

Spare parts be gone(updated)

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone

Re: Spare parts be gone(updated)

Re: Spare parts be gone(updated)

Re: Spare parts be gone(updated)

Re: Spare parts be gone(updated)