legacycentral bbs

I'm not even 100% sure this is a '95 WRX engine. My guess is based solely on the trans ID number. I won an ebay auction for a '94 STi motor and this engine showed up a couple weeks later. Anyway, it has grey injectors and one is inop. I still need to swap the alledged dead one to a different cyl to verify it. Will '02 USDM WRX injectors work for me? This thing is running on a stock EJ22T ECU.

Would these work for me?
http://www.ebay.com/itm/Nissan-200SX-24 ... 79&vxp=mtr

Labeled for Nissan, but they look the same as Subi ones.

Can't remember for sure, but I think someone is selling a set of grey 440s on rs25.com. That place and NASIOC have them fairly often. I wouldn't know about the Nissan injectors. I know there's an interchange between brands, but don't know off hand.

And oh yeah, even though they're 440cc none of the usdm wrx injectors will fit.

I have 3 440s in my glove box i would sell for 75 shipped, then you'd only have to track down 1 injector

Thanks for the reply. The car started running on all 4 again the day before I received a set of injectors from a guy on NASIOC. Now I don't trust it. Time to check out more of my crispy wiring.

Check the resistance on the injectors - should be 11-13 ohms, I believe.

Also, your original stock pink injectors will fit in the EJ20 Rails, since the 440's fit the EJ22T rails, if that's an option.
Td