Page 1 of 1
Will a WRX flywheel work with a 90-96 Legacy PP/Clutch disk?
Posted: Thu Nov 15, 2012 6:41 pm
by hellosubaru
I'm doing a 5MT swap, and I have a WRX flywheel that was just machined. I'd like to use it with my clutch kit I just purchased for my Legacy. It's a non-turbo trans if that matters.
Will the WRX flywheel work with the NA Legacy clutch kit?
Thanks,
-Jason
Re: Will a WRX flywheel work with a 90-96 Legacy PP/Clutch d
Posted: Thu Nov 15, 2012 6:45 pm
by Legacy777
Jason,
What year/style of WRX flywheel is it for? If it is for the pull style found on the 02-05 it won't work with the non-turbo clutch setup.
I know in later years they changed the WRX clutch to the push style. So if the flywheel is meant for one of those transmissions, it may work.
Re: Will a WRX flywheel work with a 90-96 Legacy PP/Clutch d
Posted: Thu Nov 15, 2012 7:13 pm
by hellosubaru
It is for the pull style (it's out of a 2002 WRX). I had originally purchased all turbo clutch parts, because I was told the transmission I purchased was a turbo trans. When I received the trans, it was quite a different story.
It sounds like I'll have to find an NA Legacy flywheel then. Thanks!
Re: Will a WRX flywheel work with a 90-96 Legacy PP/Clutch d
Posted: Thu Nov 15, 2012 7:21 pm
by Legacy777
Yup, you'll need a non-turbo flywheel. Good luck.