Page 1 of 1
Clutch wont engage help!
Posted: Mon Oct 05, 2015 4:46 am
by Ej22tfun
Alright so i just finished swapping motors from my 92 legacy ss into my 91 ss. Everything is great except for the fact that my clutch wont engage. I can start the car but i have no clutch pedal. Im not sure what happend becuase neither of the cars had amd issues with the tranny prior to the swap so it has to be something i did wrong but what could it be? I know i put the throw out bearing in the correct way and ive bleed the clutch but im not sure where to go from here
Re: Clutch wont engage help!
Posted: Mon Oct 05, 2015 6:40 pm
by Legacy777
Can you provide any additional information as to what you've done to troubleshoot the problem?
Re: Clutch wont engage help!
Posted: Mon Mar 20, 2017 12:31 am
by WRXish
I'm having the same trouble....at a total loss to understand it
Re: Clutch wont engage help!
Posted: Mon Mar 20, 2017 7:12 am
by zeke
Did you recently do anything with the clutch and does your car have a turbo transmission or a na trans?
Re: Clutch wont engage help!
Posted: Mon Mar 27, 2017 6:16 pm
by Legacy777
WRXish wrote:I'm having the same trouble....at a total loss to understand it
I thought you had a non-turbo car with cable transmission? If so this would likely be a completely different issue than what the turbo transmission was likely dealing with.