legacycentral bbs

I don't know man, I feel like I've been going in circles in this car. But I do like power slides. The old engine had a bad valve and the key way on the crankshaft pulley broke the crank. I can't be the clutch can it? The cars been awesome. I bought it for $200, put a engine in it 3 years ago and bee...

The codes are as followed, 12-starter switch-starter switch detected in on positon 22-knock sensor-open or short in circuit 23-airflow sensor-improper air flow sensor detected 24-air control valve-open or short in circuit 31-t.p.s.-open or short in circuit 41-fuel mixture lean-ecu detects lean mixtu...

I got the code. I jumped the wire under the dash. I work at a european repair garage and have some info of subies. I get about 4 codes, I'll check them today and post em. All cylinders are hitting strong. I've seen the harmonic balancer cause vibration , ever see one go bad on a subie? The plugs and...

Sometimes when I pull out from a stop or go up a hill , I get a slight vibration. When it happens, I think it may not have all the power it usaully does. The engine is stock and I have a IAC problem. I also have a code stating that my engine is running lean. It won't idle w/o me giving it gas when t...

When I unplug the idle air valve the rpms go up. When I took off the electrical part off the top , I could open and close the plate inside. Can the electrical part on top go bad?

Theres no vacuum leak and the controller that is on the cruise cable holds vacuum. I traced the vacuum line to another part with a 4 wire plug. Could that be the problem? Can I test that?

Sweet lookin rides . I would rather stick with a Subaru wheel than a cheap peice of garbage wheel . Are the gt wheels hard to get a hold of and how pricey?

I live in Ellsworth, bout 16 miles from Washington. I've made some house calls to McMurray to work on some Mercedes.

It only worked like 5 times after the long trip. If I played with the swicthes for a while it would work sometimes. Is there a criuse amplifier or a computer?

What newer legacy's have the wheel bolt pattern as my 90 legacy?

When I bought my legacy , I swapped the engine from a newer legacy. From the first time I fired it up, It doesn't like to idle cold. I had to give it gas to keep it going so I adjusted the throtle cable to keep it running. Once it warms up its fine and has no problem restarting. If the temp. is belo...

I have a 90 legacy wagon 5 spd and the cruise gave out on me during a long trip. After that it would work for about 10 miles then give out. When I push the cruise button I hear a clicking sound behind passenger side dashboard. Any clue?