legacycentral bbs

Yess SirR!!
and yes , turn signals not lamps

Vclip of 0-60, then 60-100^^
3/4 throttle
Quality is a bit rough.. the exhaust is yet to be sealed, so its a bit loud still.

next is plugs& wires

after measuring the knock sensor between the chassi ground and the connector terminal it is no greater than 350k ohms , as ive read its meant to be between 400k and 700k

also between the sheild and the terminal is 350k ohm

male -male USB cable ?

***

ok so i ran the ECU reset procedure pulled fuse 14 waitied one hr started the car, first attempt failed, second attempt ran for 20 minutes turned ignition to OFF check codes 22,32,44,45 i may have read improperly in the beginning # 22 Abnormal voltage produced in knock sensor monitor circuit - Sets ...

for start i installed a proper o2 sensor this morning and the motor seems to run better, i ve not cleared the codes, so they re all still there sounds like it is missing alot , it is flooding and i bet plugs and wires will help so they re up next for replacement i spent all day in it messing with id...

here's the scenario..codes are 12,32,44,45 ORIGINAL codes: 12 Abnormal signal emitted from starter switch-both 32 Oxygen sensor inoperative-both 44 Duty solenoid valve inoperative/wastegate control-turbo only 45 Faulty Atmospheric pressure sensor- nonturbo only i don t understand #12 the car starts ...

brushed 15cm of snow of the roof with a hockeystick

Soo this weekend between a 3000 word paper and a site report, i scurried up enough courage to pull the motor out and drop a new engine crossmember in right before work .. .. ... http://i209.photobucket.com/albums/bb303/N1446-W0963/IM0001777-2.jpg yeahh rrighttt i prop'd the car up and whipped out th...

ground the engine cradle down an inch or two and removed the front swing arm to accomidate the sweetness..
OBX front exhaust

BinG*!

AAANNND re-installed the shifter linkage from rubbing against the drvshaft and no more WHuRLLLLL!

snow in the AM too ! wooT wooT

this is how happy I am !



i am so pumped this is now cleared up , i started loosing sleep over it !

i cleaned everything up after fitting the new headers and took the car out for some air

she's now whisper quiet

here s som pics

Well , here it is the reason behind three months of confusion and doubt - the shifter linkage i must of pulled it out of the pivot when i caught the transmission http://i209.photobucket.com/albums/bb303/N1446-W0963/IM0001777.jpg this explains the vibration in the shifter the shifter linkage is out o...

i found it i found itt good news is that its not clutch related OR the exhaust as i first thought upon further inspection i see this http://i209.photobucket.com/albums/bb303/N1446-W0963/IM0001777.jpg this explains the vibration in the shifter the shifter linkage is out of its pivot and is marring up...

in the right hands it may have a chance , , i say a 3000 $ paintjob in turbo-blue , put an injen decal on the side and a "typeR" badge on the boot my life would then be complete :lol: comming rright UP !! 1 rice sticker of approval !! http://i209.photobucket.com/albums/bb303/N1446-W0963/ri...

this is commical
since 2pac vs. BIG , the demise of this style has disenegrated
no more real mc's anymore , no more creativity , no more beastie boyz
mainstream rap is garbage

that gateway does look pimp
i have xp and its 2008

i have the acer aspire one also +1 for me though more ram would be nice i m running autoCADD full version on it and it works ok, model i have is 8.9" screen durable yess , the one i have has flew across the room when i got up quick and caught the power cord with ma foot ! - no damage , the scre...

great !!
i only got search results of the oppisite , ie, 1gen into 2nd gen

thanks for the reply

is this for the 2.2 because i have been looking for this for a long time no its for the 2.5RS '98-'05 so i find out tonight the OBX EL headers designed for the 2.5RS '98-'05 do not bolt on past the turbo crossmember on a '91 SS , the gap built-into the the member for the up-pipe is clearly in the w...

i love how he compares the crossfire to the "crapping dog"
i ve said the same thing about the infinity FX
looks like it takin' a poop

yeah hearing is limited , you d not be able to hold a conversation inside as the sound is veryy loud , especially under power - it sounds very dry like a tractor exhaust - it was only necessary that i drive it without pipes when i moved in September , i drove 10 miles to the city under light load wi...

in tha beginning
there was OBX



finally looking forward to the weekend

You don't have any headers on??? I sure hope not because there is a problem right there. yup this car went from 2.2T to 2.5NA so the headers dont match - the 2.5NA header just arrived in the mail and whats left of the 2.2T exhaust is whats left on the car , only from the catback as you may of guess...

The sound I hear is the sound you hear when you spin a skate board wheel and you hear that whirling sound of bearings spinning. That's just me 2 cents though. i did not replace the TO bearing at the time of the swap i know that roller-bearing sound very well this is not that sound , this sound is m...

asc_up i am offended by how nice that car is
i can see it will be a while yet before the one i have looks anything near as nice

and livestrong im not knocking on your spacecraft - that thing is superfly

i m starting to think throwout bearing now too the noise is not present when the engine is idle and the clutch is disengaged engaging the clutch is not a problem , releasing the clutch is not a problem , rolling underpower in first is no problem , shifting into second and engaging the clutch for pow...