legacycentral bbs

So the idea has been rolling around in my head. I know there are no tuning on the stock ecu for the 2.2t and that the ej20g ecu can be modified to work. Now both the 2nd gen eclipse gsx and the first gen turbo legacy use the same connector's. As for pin layouts they differ from each other. So a patc...

You still have these and where are you located

Yeah the location for the box worked out really well I made sure that I checked fitment a few times before I mounted it. The nice thing and pain in the butt part is location. 1. Its a nice way to keep it close to the battery for the best possible power and ground. 2.The location keeps the engine bay...

So update on the Subaru project I have been keeping busy with work and haven't really had time to post up some pictures but I have done a few mods to the car since I got it a year ago and thought I would post them. The first thing that I have done was upgrade my stock scoop to the wrx scoop. I notic...

So I have picked up most of the stuff I'm going to need for my swap over to ej20g and planning on getting the rob tune chip in the ecu. My main question I wanted to ask was. Would it be ok to run the stock 390 injectors on the stock ej20g computer. My current set up is a swapped tdo4 with a 06 top m...

The 91 I sadly had to scrap. I do have a lot of parts for it laying around still. There was just to much rust on the under car part of the chassis to many holes in the unibody where I would of been fine if I was going to drive it daily but I have been planning on going to the track and maybe some Au...

They look so awesome I'm jelly

Aww that makes me sad that they dont make them in 15's any more i know the rally car according to the info i read ran 15 or 16's. there also a little out of my price point. Ill just keep with my stock turbo rims and all seasons/ winter tires and find a set of rally rims some where for 15's

So I have been searching the internet for awhile and I've turned up with nothings. I'm looking for the rims featured on the Legacy 555 blue wrc car I know that they are 15 inch wheels. I have no clue who made them or where I might be able to find some of the rims. I've found a few after markets that...

I do have a 2.5 rs manual trans in a car that was a automatic. The cable does reach and can be screwed in it seems like the internal part of the cable that connects the speedo and trans im guessing is to short and is not engauging the speedo in the cluster

So I see in the code chart that there might be a relation between error code 24 for the air control valve and error code 33 which is vehicle speed sensor. Could error code 33 set error code 24 since the air control valve control input is vehicle speed. 2 questions a how does the computer get the vss...

Well looked down the hole where the clutch fork is and didn't see any issues. Thinking it was a throw out bearing issue pulled the transmission and lowered it down out of the way. I found almost half the pressure plate fins where bent and the throw out bearing had some play in it. So i guess its tim...

No not yet ill have to stop over where the car is located and take a look to see if anything is wrong. I wonder if i bunged up the throw out bearing when i swap the engines over its making one heck of a racket

So do you take the whole plastic assembly out of the trans. Thats what I did and I just screwed the cable end into the trans But I still dont have a speedo idk what Im do wrong

Well installed the new master and slave cylinder bench bleed both the system and them installed and bleed again pedel felt allot better then it did before, but still same issues with not allowing me to put the car in gear. I adjusted the master cylinder fork where its meets up to the pedal all the w...

Well just in case I just ordered up both master and slave and will be installing them this weekend and will let you know how that goes

So I recently just finished up a engine swap into a 92 legacy turbo. The car already had a 99 2.5 rs 5 speed swapped with master and slave swapped as well. Here is the deal when I bought the car I noticed that the clutch would disengage fully and would engage maybe a 1/2 inch or less off the floor a...

Really cool thats what I though but wasn't 100% sure

So last week I picked up a 92 turbo legacy with a 99 2.5 rs 5 speed trans swap done to it. The previous owner never got around to figuring out how to hook up the speedo. Since the car is the old mechanical style vs the electronic speedo in the 2.5 trans. Is there any way to hook up the cable into th...

So I have rejoined the Subaru club again and have miss it so and in coming back to the Subaru world not only did I got one Subaru I now have 2 in fact both are Legacy turbos one is my first t-leg and the other one is a 92 ss that originally an automatic but some one swap it to a 5 speed out of a 2nd...

Well I ended up selling the Subaru the new owner is a really cool guy and Im glad its in the hands of another Subaru lover. My new Vehicle sad to say is not a Subaru. I would love a newer 4th gen lgt but i can't afford one with student loans and other bills thats going to have to be something for a ...

It wasn't bad at all. The scoop is of a 04 wrx. The opening from the old scoop gets covered up by the new scoop and the old scoop cutout is the same size as the 06 wrx intercooler. I also went the extra mile and took sanded,primed and painted the scoop to match the car. The scoop I got already had t...

Thanks I have a few things Im thinking about adding like my new 90 Degree elbow I put into the car and my Bov adapter plate update that I did as well.

Ok cool I just noticed that issue and though it was normal until i drove my friends car. So ordered the new line from subaru. I was able to make up a boost leak tester and checked for leaks I found that air is leaking around my adapter plate that i made so im going to have to fix that issue which si...

So I know its been awhile since I undated this post. I did get a used 90/91 non turbo engine harness it was really easy to modify the harness to make it work. I just took cut the tape and removed platic loom covering and took relocated the coolant temp sensor and level sensor connector down the to t...