legacycentral bbs

Good to known

Thanks!

Makes sense about gaskets.

I was concerned about piston and valve clearance.

Wonder if it would be an interference motor or not afterwards?

Currently have 96 2.2 with poor bottom end and a 01 2.2 with poor heads.

Can I replace my 96 short block with the 01 short block?

Using the 96 heads, intake, exhaust and everything that goes with it.

this type of a build isnt about revs its about torque at the low RPM range. the guy on the rs club said it pulls very hard. a little better than a ej25 in the 1st 3 gears. i was gonna do this in my FWD but am buying a turbo car instead. my brother may do this or he may just put a whole ej25 in it h...

Looking for a Rio red spoiler for a 97 outback wagon.

Thanks

What other cars can I pull replacement transmissions from?

All I know about mine is it's a 4.44.

Will a trans with the last 4 digits cdba work? It's from either a 01 OB or a GT seller isn't 100% sure.

Tried to replace front brake pads. Turns out I have siezed caliper piston. Need to order a new one or get some used dual piston ones.

hey guys decided to cancel the order, decided to wait until the springs are installed, to determine if i need them, i might put in strut spacers in so it might reduce the drop I was under the impression that the 05 sti struts won't work due to the change to the 5X114.5 hubs. modified the 05 strut t...

My 01 alternator died at 154,000. Interestingly it died almost exactly 1 year after my ss alternator died. Both times were at the dealership when I was visiting with my friend that works there. Sabotage? Just kidding :lol: Let's just say I will not be driving there the second week of June next year.

Thanks!

I will do a VIN check to see. The interior was stripped out when I got the car so I am not sure it is II or not. Pretty sure it isn't but it can't hurt to check.

This has gotten a little frustrating as the car was supposed to have a complete harness.

Doing a swap on my 95 impreza sedan. http://photos-f.ak.fbcdn.net/hphotos-ak-snc6/264276_10150249543204675_675829674_7109245_1272633_n.jpg We are doing a swap and we are missing the part of the engine harness that runs between the blue and grey connectors and the ecu in the above picture. Is that ha...

My 01 alternator died at 154,000. Interestingly it died almost exactly 1 year after my ss alternator died. Both times were at the dealership when I was visiting with my friend that works there.

I was under the impression that the 05 sti struts won't work due to the change to the 5X114.5 hubs.

i might have a buyer here in fargo that would be interested in the door handles. the dirvers door handleon his 94 ss broke.

i will get back to you.

Soul Shinobi wrote:This was recently uploaded to Youtube, so I might as well share:

Colin McRae & Subaru Legacy RS - with pure engine sounds (WRC Tour de Corse 1993)

awesome! That is how rally videos should be made, no music just engines.

looking for a drivers door handle for a 94 SS.

car is winestone pearl.

thanks,
Greg

please send PM.

i am interested in the clutch and brake pedal assembly for our impreza project. right now it has a jdm wrx gearbox in it that needs a pedal set out of a SS.

that's ok. because when he decides he wants it fixed i will probably be the one doing it.

cool, we also plan on using the 4.11 diff from the legacy to match our JDM wrx gearbox.

specifically rear suspension parts. i know that the struts are the same but how about lateral links, trailing arms and the rear crossmember? we have a 95 impreza sedan project car and we have a 95 legacy LSi sedan that we have for donor parts that isnt as rusty as the impreza. what can we swap over?...

if yo part out i am very interested in the pedal box.

did you keep the pedal assembly for the hyrdrolic clutch set up?

leaks on the pass side.

shouldnt have looked at that. i just sold my 94 sport sedan tonight.

thanks josh, the new owner has opted to take the "dont fill it all the way" approach. it would seem that 7/8ths full is about where it starts leaking and smelling.