legacycentral bbs

http://s1195.photobucket.com/albums/aa3 ... nt=car.jpg


LIME GREEEEENNNNN!!!!

nothing in the engine bay, and only a few wire harnesses were unplugged, radio the heater thing and anything attached to those 2, havnt tried the engine codes, but it was going on and off when the stalling was happening not right at the time but same day

ok i took out my whole dash to suede it ( turned out terrible) and put it all back in and then the day after my car has been stalling while im driving so kinda scary, its when i put the clutch in the rpms drop too low and stalls, also my exhaust broke in half about 3 feet after the down pipe. could ...

exactly what my dad suggested ill do that thanks!

did the water pump about a month ago and everything looked fine around the timing belt but didnt look behind it

the underside of my engine is saturated with oil and is leaking onto the exhaust manifold causing it to stink real bad and smoke can be seen sometimes i can see its oil burn marks on the manifold and about half way back on the exhaust, the car runs fine and i check my oil every couple days and seems...

ya they are hard to put on good, ive tried the image tag things then when i view my post it doesnt work, i just put the link between the two [img] tags ?

http://s1195.photobucket.com/albums/aa3 ... 011213.jpg

8 bucks on ebay

just you tube how to do it properly and you will get good results, in the pic i havnt put any polishing compound on yet so it will look nicer too, heres the video i learned from

http://www.youtube.com/watch?v=OSKA0ElK ... 6AFFDC3967

smoked out tails on sedan, $12 VHT night shades.

http://s1195.photobucket.com/albums/aa3 ... 011409.jpg

ya you never get nearly as much as you put into a car when its that old, and i dont see how the amount of gas he spent driving it has anything to do with the ad haha

off topic but found it looking for legacys for swap

http://vancouver.en.craigslist.ca/van/c ... 15416.html

yeah the more i start to look in the wheel wells and underneath the more i want to get a clean legacy.thier are parts i can grab the metal and tear it off its so rusty

i love my car, the power and the 5 speed, but theres just to much rust and little things. A girl i work with has a 93 legacy awd auto, and the body is really clean with no rust and has about half the km mine does, she got it for like 400 bucks, so when she decides to sell it (she wants a prelude) i ...

sick!!! i think 18 19 would be perfect, must put you back in your seat pretty good

okay sweet, then when it comes time to get EM how much boost can this turbo run?

so if i had a wideband and boost control and boost gauge i could run this turbo on around 10 psi on stock ecu?, and does anyone know if guage clusters are interchangable between turbos and N/A?

i dont need the ej20g engine to run robs 20G tune? how much did that cost you logan for the 20G ecu tuned by him to work with the 22T ?

okay just looked at the big hose on the front of the water pump and the clamp wasnt fully tightened, so i did that up tight, and i will see if i have steam when i get too work. if i still do, my dads mechanic friend said bring it over to his place for a pressure test and we will probably find it, co...

how good is the Vf43 compared to the TD04? in terms of power gain and lag issues? i know the TD04 isnt much more power than the vf11 and has a quick spool up. logan would you recommend i go to a JECS MAF then? or keep it stock? i only plan on running around 8-10 lbs of boost until i get some sort of...

did not check for cracks, and the water pump we took off did have the metal gasket, will the metal gasket fit fine to an aftermarket waterpump?

so if i get a TMIC, 440's, JECS MAF, that wont be okay?

found one close by to where i live ,was wondering what i need to make it work? can i run it on stock ECU?

clean wagon , i have a sedan anyways ss with a 5 speed, i was just planning on painting it satin black but i think im gonna go with gunmetal grey

i pm'd you matt