Custom downpipe

Headers, cats, uppipes, downpipes, midpipes and mufflers.

Moderators: Helpinators, Moderators

Post Reply
subytech
Second Gear
Posts: 371
Joined: Mon Oct 02, 2006 12:58 am
Location: Bellingham WA
Contact:

Custom downpipe

Post by subytech »

Image
Image
Image
Image
Just a little project I've been working on. I know the welds aren't pritty and the flow patterns may not be optimal for all the engineers out there and i dont care i had fun making the jig and the DP and the car pulls hard now with my new injen SS exhaust, its a de-catted stock dp and some pipe from the stock header off my old ZX-6R!
92 Legacy Turbo, 5sp MT, Early Large CC 20G heads, Ported custom clocked td04, Cobb catted DP, Injen SS 3" exhaust, Turbosmart MBC @ 10psi, Apexi 20g intake, custom FMIC, Fidanza 11lb flywheel, stock 05 WRX clutch

SLODRIVE
Third Gear
Posts: 662
Joined: Fri Nov 21, 2008 1:27 am
Location: Colorado, north of Highway 52
Contact:

Post by SLODRIVE »

I like it. Nice work!
http://www.slodriveracing.com
-92 SS 5MT- EJ20H swap, Haltech standalone ECU, TD04, FXT TMIC, 3" exhaust, STi/AGX struts, JDM 5-speed, 4.111 LSD rear, Blitz EBC, etc.
-'93 L Wagon - Pink Roll Cage - "Dirty Leg"
-And more!

Legacy777
Site Admin
Site Admin
Posts: 27611
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

Looks good!
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm

AWD_addict
Fifth Gear
Posts: 2774
Joined: Sun Nov 23, 2003 12:22 am
Location: Western WA!

Post by AWD_addict »

Nice DIY action from used parts.
90 L+ wgn

BXSS
Fourth Gear
Posts: 1301
Joined: Wed Jan 10, 2007 4:23 pm
Location: Bx, NY

Post by BXSS »

Cool
94 Legacy SS
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD

gijonas
Fourth Gear
Posts: 1010
Joined: Sat Nov 08, 2008 10:57 pm
Location: Damariscotta, Maine

Post by gijonas »

Sweet project,any boost creep?
94SS.Wiseco forged pistons,TD04,TMIC,WALBRO 225,440's,3" all the way,revtronix stage 2,enough other crap to fill the internet.

THE TRIBUTE BUILD>>>LINKY LINK>>> http://bbs.legacycentral.org/viewtopic.php?p=295455#295455

subytech
Second Gear
Posts: 371
Joined: Mon Oct 02, 2006 12:58 am
Location: Bellingham WA
Contact:

Post by subytech »

gijonas wrote:Sweet project,any boost creep?
Yea, less than before but i'm not sure if its from the new DP or the fact that I put a different intake manifold on (from another ss). I added two vacuum ports on the manifold, one for my MBC and one for my boost gauge. So now the MBC gets it's signal from the manifold instead of the compressor outlet. I also have a FMIC and before the new manifold, with the stock DP I would creep almost 4 psi in a 4th or 5th gear roll on in the free way, now i'm down to about 1-2psi.
92 Legacy Turbo, 5sp MT, Early Large CC 20G heads, Ported custom clocked td04, Cobb catted DP, Injen SS 3" exhaust, Turbosmart MBC @ 10psi, Apexi 20g intake, custom FMIC, Fidanza 11lb flywheel, stock 05 WRX clutch

BXSS
Fourth Gear
Posts: 1301
Joined: Wed Jan 10, 2007 4:23 pm
Location: Bx, NY

Post by BXSS »

Ever thought about an atmo dump for the actuator tube?

Alot of 4g63 guys do this...
94 Legacy SS
96 Impreza OBS
99 Impreza OBS-T
04 Sienna XLE Limited AWD

asc_up
Fifth Gear
Posts: 2473
Joined: Sun Sep 10, 2006 9:15 am
Location: University Place, WA

Post by asc_up »

I was thinking about doing that! I be the flange in between the WG and downpipe would have to fit snuggly, otherwise you'd probably get a ton of exhaust noise out the dump tube.
-Aaron

2000 Audi S4 - 2.7L Twin-turbo, 6 Speed

[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]

subytech
Second Gear
Posts: 371
Joined: Mon Oct 02, 2006 12:58 am
Location: Bellingham WA
Contact:

Post by subytech »

I had a friend that welded a dump pipe onto the stock dp on his STi, sounded funny to me, and i think this looks cooler to lol.
92 Legacy Turbo, 5sp MT, Early Large CC 20G heads, Ported custom clocked td04, Cobb catted DP, Injen SS 3" exhaust, Turbosmart MBC @ 10psi, Apexi 20g intake, custom FMIC, Fidanza 11lb flywheel, stock 05 WRX clutch

logan9691
Second Gear
Posts: 310
Joined: Sun Jun 15, 2008 4:40 am
Location: Ellensburg, Wa
Contact:

Post by logan9691 »

just remember...mine pulls harder :D
VF43 custom FMIC APEXI intake Invidia 3" TBE JDM Ver. 4 RA STi trans (4.44) SPT short shifter rear LSD WRX rear axels coilover suspension JDM 4-pot front brakes drilled slotted rottors Greddy EBC tuned 20G ECU sti 550cc injectors Jecs MAF walbro 255

Post Reply