Rallycar!

aspect · Post by **aspect** » Mon Feb 07, 2005 11:10 am

I donno who remembers me posting my red SS with the huge foglights a while back, but this is what it looks like as of friday, thanks to patrick richard and his prep shop.

The days of relying on empty parking lots and TSD rallies to get my sideways fix are soon drawing to a close.

mikec · Post by **mikec** » Mon Feb 07, 2005 12:59 pm

Looks good!

greg donovan · Post by **greg donovan** » Mon Feb 07, 2005 4:00 pm

that is some potent rear underbody protection.

you planning on rallying in a land mine field?

love the red roll cage.

what kind of computer is that?

skid542 · Post by **skid542** » Mon Feb 07, 2005 5:22 pm

Looks simply superb.

greg donovan · Post by **greg donovan** » Mon Feb 07, 2005 5:43 pm

nice touch w/the washers on the skidplate to deflect crap away from the bolts. nothing more frustrating than needing to get the skidplate off when the bolt is mangled from rock impacts.

did you oversize the holes a bit too?

Brat4by4 · Post by **Brat4by4** » Mon Feb 07, 2005 6:27 pm

Impressive.

But there is some sound deadening in the rear that I see you could get out of there really easy

. Do you plan on keeping all the door cards in place? And I spy stock sway bar endlinks... And it looks like Patrick is not only a great driver, but does good work, too.

J-MoNeY · Post by **J-MoNeY** » Mon Feb 07, 2005 9:09 pm

SICK! Man, I love that no carpet look with the red cage and harnesses and seats. Very, very nicely done.

More pics!

LegacyPunk · Post by **LegacyPunk** » Mon Feb 07, 2005 9:31 pm

I want one

BAC5.2 · Post by **BAC5.2** » Mon Feb 07, 2005 9:35 pm

What shift linkage is that....?

I would love a cage... Hmmm... What did something like that cost you?

greg donovan · Post by **greg donovan** » Mon Feb 07, 2005 10:10 pm

i would guess between 800-1500. it looks like a pretty tight fitting cage around the a-pillar.

is this one of those Custom Cages kits like in mike wray's PGT legacy?

legacy92ej22t · Post by **legacy92ej22t** » Mon Feb 07, 2005 10:18 pm

Love the cage! Those skid plates are beefy as all hell. It looks really tight.

William- He did say stage 1 of 3 were complete. I would imagine that the links and Dynomat crap will be addressed soon.

aspect · Post by **aspect** » Mon Feb 07, 2005 11:50 pm

greg donovan: It's a brantz laser 3. The rock guards on the bolts are actually custom machined metal cones that fit into the skidplate. Very fancy.

Brat4by4: The rear links are actually whiteline droplinks

The door panels keep the noise down a bit, and look a lot better considering I don't have any fancy metal panels to cover the doors.

BAC5.2: It's stock man

As for the 800-1500 figure, good luck. It's true that you can certainly get a cage built (or make it yourself) for that kind of money, getting it overbuilt like this with extra chassis points, many extra bars, and quailty tubing isn't cheap.

And no, this isn't a kit. Patrick Richard (www.patrickrichard.com) and his prep shop make it from scratch inside the car.

I'll take another couple pics showing the roof setup, it's prbably the most impressive part of the whole cage.

magicmike · Post by **magicmike** » Mon Feb 07, 2005 11:55 pm

umm I hate you

91White-T · Post by **91White-T** » Tue Feb 08, 2005 12:41 am

Just wondering, how come you left the door panels on?

greg donovan · Post by **greg donovan** » Tue Feb 08, 2005 1:49 am

91White-T wrote:Just wondering, how come you left the door panels on?

aspect wrote:The door panels keep the noise down a bit, and look a lot better considering I don't have any fancy metal panels to cover the doors.

greg donovan · Post by **greg donovan** » Tue Feb 08, 2005 1:57 am

aspect wrote:As for the 800-1500 figure, good luck. It's true that you can certainly get a cage built (or make it yourself) for that kind of money, getting it overbuilt like this with extra chassis points, many extra bars, and quailty tubing isn't cheap.

that was just a guess, as a full FIA kit for an impreza is 1400 from Primitive Racing. from the pics you showed it is hard to see much extra bracing. and i was assuming it was a kit and done yourself. but if you had Pat Richard's shop do it then i'm sure it is very safe and cost quite bit more than that.

what type of tubing did you use?

chrome-moly? if so then all the joints had to be stress relieved then so i can see where alot more of the cost would come from.

show us some more pics of the car and maybe some nice shots of scenic Victoria while you are at it too.

that is one of the most beatifull cities i have been to in quite a while.

THAWA · Post by **THAWA** » Tue Feb 08, 2005 5:30 am

that's awesome. What tires are those?

greg donovan · Post by **greg donovan** » Tue Feb 08, 2005 5:54 am

THAWA wrote:that's awesome. What tires are those?

i was wrong about the cage prices but i do know my rally tires.

they are silverstones. and they look like they are the Rally S-525. they are a good inixpensive alternative to the yokohama advans or the pirelli KMs.

you can get them new from here:

http://www.taborrallyteam.com/silversto ... stone.html

not sure about the wheels though. but i like the way they look.

THAWA · Post by **THAWA** » Tue Feb 08, 2005 6:02 am

the wheels remind me of I think the h6-3.0 outback sedan wheels. Is that what they are aspect?

stipro · Post by **stipro** » Tue Feb 08, 2005 6:40 am

I think those are 15" wheels off of a MY99 Impreza TS Sedan

NuwanD · Post by **NuwanD** » Tue Feb 08, 2005 6:43 am

wow, beautiful prep work on the car... i'm hopfully going to be getting a similar cage done very soon

I noticed you've got the co-drivers seat pushed back pretty far, which I really need to do (big co-driver)... seems like you aren't using the stock seat mounting points at all... does the cage have bars going across the floor pan to mount the seats or is there something else done that I can't see? info and possibly pics would be greatly appreciated!

aspect · Post by **aspect** » Tue Feb 08, 2005 5:04 pm

stipro wrote:I think those are 15" wheels off of a MY99 Impreza TS Sedan

Nice guess, you are correct. Add $8 worth of spray paint

Right about the silverstones as well. Good tires for the price! These ones are totally beat though...I just ride around on them on the street now.

The seat mounts consist of two bars welded across between the transmission tunnel and the side of the floorpan, I can post some pics of that later today as I have to pop one of the seats out.

greg donovan · Post by **greg donovan** » Wed Feb 09, 2005 6:21 am

aspect wrote:
stipro wrote:I think those are 15" wheels off of a MY99 Impreza TS Sedan
Nice guess, you are correct. Add $8 worth of spray paint

Right about the silverstones as well. Good tires for the price! These ones are totally beat though...I just ride around on them on the street now.

The seat mounts consist of two bars welded across between the transmission tunnel and the side of the floorpan, I can post some pics of that later today as I have to pop one of the seats out.

love those wheels. they would look awesome in gold too i bet. i may have to get a set of them.

i would love to see more cage pics. that is the best way to mount the seats i think.

so what is the material for the cage?

legacymax · Post by **legacymax** » Tue Feb 22, 2005 6:38 am

looks great. I am going to start stripping my 91 red SS to be my rallycross(for now) car this next week. What did you do in place of the sunroof?
-Max

greg donovan · Post by **greg donovan** » Tue Feb 22, 2005 3:32 pm

for the sunroof you have a couple options.

you can weld a pane of sheet metal in place but it will probably warp.

you can rivet a piece of diamond plate in. looks kind of cool.

or you could strip the whole roofskin off and weld a non sunroof skin on. this will look the best but will be the hardest. it will also make istallation of the cage easier while the roofskin is off.

if you go to vermont sports cars web site it has some awesome build up articles w/alot of pics.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Rallycar!

Rallycar!