My 92 legacy wagon NEW PIC!

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 1:21 am

Hey guys here's some pics of my car. I got the suspension swap done!! It is lowered 2.5" with 02wrx wagon struts and tein s-tech springs.

BEFORE...

AFTER!!

[/b]

LaureltheQueen · Post by **LaureltheQueen** » Tue Feb 22, 2005 1:22 am

silverstars?

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 1:26 am

no they are nokya artic white pro halogens

LaureltheQueen · Post by **LaureltheQueen** » Tue Feb 22, 2005 1:29 am

coolio. cant wait to see more photos

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 1:32 am

I'm curious to see the rest of your wagon.

How did you mount the fog lights? I have driving lights mounted in front of my grill and I did a really ghetto homemade aluminum bracket thing that attaches using the radiator mount bolts.

It looks like you care about seeing. If so, you should get rid of those headlight bulbs; they're actually pretty lousy. You'd do a lot better with a good set of quality bulbs.

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 1:35 am

yeah these bulbs really are lousy. When i don't have my fogs on all i can see is a little bit of blue light in front of me. Do u have any suggestions on better bulbs?

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 1:43 am

The easiest good bulbs to find are Sylvania Xtravisions. Look at your local auto parts store for a magenta package labeled 9003XV.

To offer more unsolicited advice, fog lights work a lot better if they're mounted closer to the ground. I don't know if you can figure out a way to mount these ones lower, since they're so big, but if you can they'll be much more useful. Even smaller fog lights mounted under the bumper would be more useful than these nice big ones mounted high.

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 2:00 am

Yea the reason why i didn't mount them lower is because i was worried about them getting broken and i wasn't sure how to mount them upside down under the bumper lip. If anyone has any suggestions let me know

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 2:06 am

Yeah, all I could suggest would be selling these lights and getting smaller ones. Someone with a WRX might give you good money for these, since they'd fit nicely in place of their stock ones but perform better.

Woah, you've got a trailer hitch with an aftermarket muffler! Is that the dual-tip muffler that's sold really cheaply on eBay? I've always thought that my muffler options would be really limited because of my trailer hitch.

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 2:10 am

yeah i got my hitch replaced because my old one rusted out. The new one had a much larger space for the muffler. I only have the hitch for carrying my bike rack if you were wondering. Its a dtm muffler with dual 3" tips. It actually makes my car sound like a wrx, thats the only reason i'm keeping it on right now.

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 3:47 am

Hmm, so your old hitch wouldn't fit the muffler? Was your old one a Draw-Tite by any chance? That's what I have.

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 5:59 pm

my old hitch was a uhaul hitch

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 7:33 pm

But so's the one in the picture here... Or did U-Haul change their hitch design?

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 10:04 pm

Uhaul has a lifetime warranty on their hitches. My old Uhaul hitch rusted out and they replaced it for free. Yes they did change their hitch design and it was to my advantage so that i could fit in the aftermarket muffler. The muffler is mounted as high as it can go without rubbing on the heat shield and it is secured by two muffler/pipe hangers, therefore it doesn't move at all. It leaves plenty of clearance between the muffler and the hitch. I bet you could even fit a ROUND aftermarket muffler between there too.

I"LL POST A CLOSEUP PIC OF IT

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 10:39 pm

Thanks, I'd appreciate that.

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 10:40 pm

heres a better pic of the hitch and muffler

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 10:42 pm

Cool, thank you.

It looks the bumper's been... erhm... "modified." Was that just heat from the muffler that melted it back, or did you do that yourself in order to clear the muffler?

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 10:54 pm

Haha yeah when i first mounted the muffler it was mounted even with the bumper. It got hot and melted my bumper so yeah i just tried to sand it a little bit but its not been cut or modified. I got the muffler moved out farther, so now the tips are out past the bumper at least an inch or so.

vrg3 · Post by **vrg3** » Tue Feb 22, 2005 10:58 pm

Ah, I see.

ryno50485 · Post by **ryno50485** » Tue Feb 22, 2005 11:00 pm

i posted a daytime pic for those who are interested

PERFORMANCESUBE · Post by **PERFORMANCESUBE** » Thu Feb 24, 2005 1:09 am

I used to have a legacy wagon with offroad ProComp lights.
i mounted them in the holes that the license plate goes in. and
wired them up through the bumper....

perfect!!!

Jessica

ryno50485 · Post by **ryno50485** » Thu Feb 24, 2005 8:42 pm

Hey another subie chick!! You should post some pics of your wagon! Yeah i can't wait till Sunday, thats when i'm putting my new suspension on. (WRX wagon struts with tein S-tech springs) I'll post some pics of the install.

evolutionmovement · Post by **evolutionmovement** » Mon Feb 28, 2005 12:43 am

Late to this party. I had my Hella 550's mounted in about the same position (slightly outboard) and they worked well. The best part is that they move daudlers out of the way. Are yours mounted through the bumper? How did you secure yours? With mine I made stanchions with rubber stoppers and long bolts mounted to the grille to adjust the vertical angle of the lights and keep them from bouncing. I also had washers as spacers between the bumper cover and bumper beam underneath. I had to remove the lights since the body shop removed them (against my request) and couldn't reattach them right and so they were floppig about. Eventually I'll get back to reattaching them better.

Steve

BAC5.2 · Post by **BAC5.2** » Mon Feb 28, 2005 7:36 am

The slot in the bumper, just below the lights, is the hole in the bumper beam. You can drop the bumper, drill and mount a bracket to the bumper beam, and drop hang the lights that way off of a custom bracket.

SiCkSTi04 · Post by **SiCkSTi04** » Thu Dec 10, 2009 9:08 am

dang it i wish the pictures worked. =\

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

My 92 legacy wagon NEW PIC!

My 92 legacy wagon NEW PIC!

here ya go...