Flywheel, Clutch, Transmission, Axles, etc...
Moderators: Helpinators , Moderators
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Fri Dec 13, 2002 7:20 am
Just curious what everyone is using? I'm pretty sure I'll be using some synthetic when I change it next, but I'm not sure which one to use. What's everyone here using?
-Brian
'04 PSM FXT
entirelyturbo
quasi-mod-o
Posts: 6000 Joined: Thu Dec 05, 2002 7:06 pm
Location: Tampa, FL
Post
by entirelyturbo » Fri Dec 13, 2002 7:25 pm
I use Valvoline 80W90 SynBlend gear oil in my diff and manual tranny. The only problem I had changing mine was how stiff the plugs can get!
"Der Wahnsinn ist nur eine schmale Brücke/die Ufer sind Vernunft und Trieb"
*Formerly DerFahrer*
@entirelyturbo on social media, including
Facebook ,
Instagram ,
Twitter , and
TikTok
rlima
In Neutral
Posts: 20 Joined: Sun Nov 17, 2002 5:21 pm
Location: Victoria, BC
Post
by rlima » Fri Dec 13, 2002 7:55 pm
Red Line 75W90 Gear Oil.
This is specially formulated for LSD if you have one.
Roy
1991 Legacy Turbo AWD Sedan (5sp M)
Real roads don't have centre lines!
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Fri Dec 13, 2002 8:19 pm
Nope, no LSD here AFAIK. Good info guys. Anyone else?
-Brian
'04 PSM FXT
ciper
Knowledgeable
Posts: 4388 Joined: Tue Oct 15, 2002 8:16 pm
Location: SFCA
Post
by ciper » Fri Dec 13, 2002 11:54 pm
Easily available, Mobil 1 full synth 75w-90 for front and rear diff.
subyluvr2212: No kidding they can get stuck. I wasnt able to change it on the rear of my BC legacy (bf was fine). I used the correct size and bent the INSIDE of the plug
JasonGrahn
Knowledgeable
Posts: 1333 Joined: Tue Oct 15, 2002 4:55 pm
Location: Seattle, WA
Contact:
Post
by JasonGrahn » Sat Dec 14, 2002 11:58 pm
-Jason Grahn
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Wed Jul 09, 2003 6:52 am
How much fluid in the front and rear diff? I know the answer is probably in the book, but I'm lazy and it'd be helpful to have it in this thread
.
-Brian
'04 PSM FXT
Legacy777
Site Admin
Posts: 27926 Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Post
by Legacy777 » Wed Jul 09, 2003 2:03 pm
You're right it's in the book.....owner's manual to be more percise.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
eastbaysubaru
Knowledgeable
Posts: 1312 Joined: Wed Oct 16, 2002 10:44 pm
Location: Northern Sonoma County
Contact:
Post
by eastbaysubaru » Wed Jul 09, 2003 4:09 pm
LOL!
-Brian
'04 PSM FXT
Fernely
In Neutral
Posts: 41 Joined: Sat Dec 28, 2002 10:38 pm
Location: Miami, Fl
Post
by Fernely » Wed Jul 09, 2003 7:41 pm
I am using redline shockproof, I belive if you get 2 quarts it will be enought to do both diffs. I think the rear is .7 quart and the front 1.3 quarts.
We have two seasons in Miami, Hot and Hotter!
ciper
Knowledgeable
Posts: 4388 Joined: Tue Oct 15, 2002 8:16 pm
Location: SFCA
Post
by ciper » Wed Jul 09, 2003 8:07 pm
Just realized someone recomended LSD dedicated lubricant. YOU DONT WANT TO USE IT!! The LSD is a sealed unit, friction modifiers arent needed. All you are doing is creating more drag in the differential.