at to mt pedal swap !!!!HELP PLEASE!!!!

poseidon1787 · Post by **poseidon1787** » Thu Oct 06, 2005 6:07 pm

i pulled the tranny from my at front wheel drive and am getting ready to put my MT tranny in, i need to know , are there holes for the MT pedals in my AT legaacy, or will i have to drill new ones? i have searched but found no specific info on the installation of the pedals i need all the info i can get please help!!

gt2.5turbo · Post by **gt2.5turbo** » Thu Oct 06, 2005 8:07 pm

there should be a diamond shaped rubber gromet on the firewall that is made for the clutch i believe. other than that everything elses should go through the holes already there.

Have you read the write up on the awd/mt swap? it is very very helpful

THAWA · Post by **THAWA** » Fri Oct 07, 2005 1:59 am

What year is your car, and what kind fo pedals are you putting in? If it's hydraulic and your car is the first gen you don't have the holes for it. If it's cable you have a hole for it, it's kinda hard to see from the engine side, but you should be able to see the grommet from the interior side.

entirelyturbo · Post by **entirelyturbo** » Fri Oct 07, 2005 5:17 am

THAWA wrote:If it's hydraulic and your car is the first gen you don't have the holes for it.

You mean if it's a 1990 only

91-94's had turbos so they had the holes for the hydraulic setup...

scuzzy · Post by **scuzzy** » Fri Oct 07, 2005 5:38 am

subyluvr2212 wrote:
THAWA wrote:If it's hydraulic and your car is the first gen you don't have the holes for it.
You mean if it's a 1990 only 91-94's had turbos so they had the holes for the hydraulic setup...

even the NA's had the holes for the hydraulic setup?

so it's just a matter of switching over to the new pedal setup and clutch slave system?

Post by **Legacy777** » Sun Oct 09, 2005 4:53 am

Yes...the holes are there.

Also....please post in the correct forum!

THAWA · Post by **THAWA** » Tue Oct 11, 2005 4:04 pm

Show me one FWD 1st gen Legacy that has hydraulic clutch holes. Hell, show me any non-turbo 1st gen Legacy with hydraulic clutch holes.

206er · Post by **206er** » Tue Oct 11, 2005 6:33 pm

what do they look like? curious to see if mine has em.

Post by **Legacy777** » Wed Oct 12, 2005 2:11 am

THAWA wrote:Show me one FWD 1st gen Legacy that has hydraulic clutch holes. Hell, show me any non-turbo 1st gen Legacy with hydraulic clutch holes.

Are you talking about the holes to mount the clutch MC?

They should be there from 91 onward.

Post by **Legacy777** » Wed Oct 12, 2005 2:13 am

206er wrote:what do they look like? curious to see if mine has em.

These are the holes, it will have a single rubber plug over all three holes.
http://www.surrealmirage.com/subaru/ima ... P_3242.JPG

THAWA · Post by **THAWA** » Wed Oct 12, 2005 3:21 am

Yep those are the ones that are absent on all NA first gen legacys. I think they weren't standard on all subarus until 98 or 99.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

at to mt pedal swap !!!!HELP PLEASE!!!!

at to mt pedal swap !!!!HELP PLEASE!!!!