. I ideally would like to buy all the parts from one dealer if possible to cut down on shipping costs.Any links or input is appreciated.
Thanks!
Sam
Engine Rebuild Kit - Where do you recommend/prefer?
Moderators: Helpinators, Moderators
Engine Rebuild Kit - Where do you recommend/prefer?
Im looking for a complete rebuild kit for my 94 SS and cant seem to find any place that has everything in a "kit". im looking for crank bearings to intake manifold gaskets. My plans are a complete tear down of the EJ22T and replace any and all worn & problematic parts, right now it has a significant low end knock . I ideally would like to buy all the parts from one dealer if possible to cut down on shipping costs.
Any links or input is appreciated.
Thanks!
Sam
. I ideally would like to buy all the parts from one dealer if possible to cut down on shipping costs.Any links or input is appreciated.
Thanks!
Sam
-
douglas vincent
- Knowledgeable
- Posts: 3336
- Joined: Sun Apr 27, 2003 5:50 am
- Location: OR, Portland
- Contact:
If you want subaru stuff, there is not a rebuild kit with bearings, etc.
Here's the stuff I'd recommend you get:
Engine rebuild kit (gaskets, etc): 10105AA052
Piston Rings (std size): 12033AA390
Crank Bearings: 12209AA000
Connecting Rod Bearings: 12108AA290
Three Bond 1207c: 004403012
Three Bond 1215: 004403007
Three Bond 1105/Fuji Bond C: 004403010
There's other stuff you can/should replace, but I didn't list them.
Rebuild kit was around $240-250
Piston rings $111
Crank bearings $83
Conn. Rod bearings $174 (ouch)
Three Bond 1207c $22.37
Three Bond 1215$18.92
Three Bond 1105/Fuji Bond C $11.18
Those prices are from Jamie @ www.subarugenuineparts.com (except the rebuild kit)
Here's the stuff I'd recommend you get:
Engine rebuild kit (gaskets, etc): 10105AA052
Piston Rings (std size): 12033AA390
Crank Bearings: 12209AA000
Connecting Rod Bearings: 12108AA290
Three Bond 1207c: 004403012
Three Bond 1215: 004403007
Three Bond 1105/Fuji Bond C: 004403010
There's other stuff you can/should replace, but I didn't list them.
Rebuild kit was around $240-250
Piston rings $111
Crank bearings $83
Conn. Rod bearings $174 (ouch)
Three Bond 1207c $22.37
Three Bond 1215$18.92
Three Bond 1105/Fuji Bond C $11.18
Those prices are from Jamie @ www.subarugenuineparts.com (except the rebuild kit)
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
I got it. Its looks really really complete. it even came with cam seal, valve cover gaskets, and what not. Its described as a rereing kit, I guess they dont know you dont have to take the haeds apart to do that.
anyway. Im putting DOHC heads on mine, so if you or anybody else wants the sohc gaskets that im not going to use, I will sell them cheap. It even came with valve seals.
anyway. Im putting DOHC heads on mine, so if you or anybody else wants the sohc gaskets that im not going to use, I will sell them cheap. It even came with valve seals.
1997 White BG Ltd 5MT, EJ22T with Wiescos, EJ20R Heads, Two large dents R.I.P
1995 Impreza EJ22T DOHC Hydra EMS, 20g, EWG, 3in APS TBE, AWIC
1995 Impreza EJ22T DOHC Hydra EMS, 20g, EWG, 3in APS TBE, AWIC
my car has 201K on the original motor and everything and im looking to rebuild what needs reuilding in the hopes to start some performance modifications. would you also suggest these parts for me? my motor as of now has no internal problems that i can detect but i dont want to start with any power adders before i know the motor is safe. also how much more difficult is this procedure compared to an inline motor? thanks