hollowing out the cat?
Moderators: Helpinators, Moderators
-
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
hollowing out the cat?
what is the best way to hollow out the secondary cat ( the one that looks like a turtle)? just use a hammer and a punch, or maybe a breaker bar er something? any help?
-
- Knowledgeable
- Posts: 3336
- Joined: Sun Apr 27, 2003 5:50 am
- Location: OR, Portland
- Contact:
-
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
Take it off and splice in a pipe. Then when you have to do the emissions
thing--put it back on..
thing--put it back on..
Subtle (normally aspirated engines suck):
05 Legacy GT Wagon with Cobb chip.
62 Alfa Romeo Spider- had a 1.6 L with 80 hp, now 2 L with 160 torque. Curb weight 2050 lbs.
93 Leg Twgn fmic, vf34, etc. ((sold))
05 Legacy GT Wagon with Cobb chip.
62 Alfa Romeo Spider- had a 1.6 L with 80 hp, now 2 L with 160 torque. Curb weight 2050 lbs.
93 Leg Twgn fmic, vf34, etc. ((sold))
-
- Knowledgeable
- Posts: 3336
- Joined: Sun Apr 27, 2003 5:50 am
- Location: OR, Portland
- Contact:
I unbolted the entire exhaust, then unbolted the 3 section from each other. then I rammed a section of tubing into the cat to break up the catalyst and then used a section of small diamter metal to yank out the sections of catalyst.
Reddevil, Awaiting new heart, will it ever happen?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
1990 wagon, EJ25 12.3 @ 116.5 FAST Family wagon getting new motor soon
1992 wagon, wifes daily, high compression
1992 Touring wagon, should I keep it?
-
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR
-
- Third Gear
- Posts: 619
- Joined: Wed Feb 22, 2006 5:14 am
- Location: portland OR