Thanks~
What sensor is this? Vacuum line routing?
Moderators: Helpinators, Moderators
What sensor is this? Vacuum line routing?
Can anyone identify what sensor this is? It's out of an n/a 1.8 and I imagine it would be in the n/a legacy as well. Can't seem to find a vacuum diagram for the n/a models so I thought I'd ask. Also I'm not sure if the top bung goes to the intake hose or not.
Thanks~
Thanks~
Subaru Impreza Ver6 replica with Ver4 Type R motorset.
Mitsubishi Evolution 4 replica with Evo4 GSR motorset.
Mitsubishi Evolution 4 replica with Evo4 GSR motorset.
It's a pressure exchange solenoid. It's used to switch from what looks like manifold vacuum to atmospheric pressure.
Is there a second hose that attaches to the solenoid?
Is there a second hose that attaches to the solenoid?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
IronMonkeyL255
- Fourth Gear
- Posts: 1902
- Joined: Sat Aug 09, 2003 5:02 pm
- Location: Woodruff, SC
That looks like the pressure sensor.
In the Turbos, that is paired with a metal cylinder looking thing which is the boost control solenoid.
In the Turbos, that is paired with a metal cylinder looking thing which is the boost control solenoid.
Disclaimer: If anything I post is inaccurate, please correct me. I do not wish to add to the misinformation floating around on the internet.
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
That being said, everything I post is accurate to the best of my knowledge.
Rio Red '91 Legacy SS
-
vrg3
- Vikash
- Posts: 12517
- Joined: Sun Nov 03, 2002 2:13 am
- Location: USA, OH, Cleveland (sometimes visiting DC though)
- Contact:
Broken image?
http://www.graphics.cornell.edu/~v/vacuum/
http://www.graphics.cornell.edu/~v/chrysler_map/
Many NAs used pressure exchange solenoids for emissions purposes.
http://www.graphics.cornell.edu/~v/vacuum/
http://www.graphics.cornell.edu/~v/chrysler_map/
Many NAs used pressure exchange solenoids for emissions purposes.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212