UPDATE: Legacy Re-furbish(ing)Complete!!!-New pics added-

stipro · Post by **stipro** » Mon Jan 09, 2006 12:32 am

The body work has begun, I was so tired of the rust on the rear quarters, that I have decided to do the whole car.
So far a new fender has been fitted, the rear door has had dent/rust removal, drivers rear quater and dogleg has had rust cut out and new metal welded in.
Progress will be updated, if anyone really cares

More pics to come

Changed title

magicmike · Post by **magicmike** » Mon Jan 09, 2006 6:00 am

perhaps you should change the title to refurbishing... as it is a present tense project. I love that color though so make sure you paint it the same color.

LaureltheQueen · Post by **LaureltheQueen** » Mon Jan 09, 2006 7:39 pm

agean blue ftw

stipro · Post by **stipro** » Tue Jan 10, 2006 12:29 am

magicmike wrote: I love that color though so make sure you paint it the same color.

Yes I will be painting it the same color, I am going to paint the body trim and side mirrors body color as well and leaving the chrome strip.

Bheinen74 · Post by **Bheinen74** » Tue Jan 10, 2006 6:24 am

man, your interior is gunna get d i r t y if you have the sunroof popped up like that and the window down when your sanding it.
good luck though. nice color. lets see updated pics when you get the time to do so.

206er · Post by **206er** » Wed Jan 11, 2006 2:39 am

hmm maybe this will motivate me to fix my iron oxide problems. nice work.

dzx · Post by **dzx** » Wed Jan 11, 2006 5:06 am

You could say rust like most people do

.

Iron (III) Oxide

because the Iron has an oxidation of +3 in this instance.

Sry, I'm bored.

is it Fe2O3 I can't remember but it seems right.

Fishy · Post by **Fishy** » Wed Jan 11, 2006 4:28 pm

Looks like it's coming along nicely. Same awesome colour as my leggy

I did a full paintjob on a car once, hated it after the first day of work... what a pain in ass. I applaud people who have the patience to do that stuff.

stipro · Post by **stipro** » Sat Jan 14, 2006 10:47 pm

New pics added:

Before.....

Cut out old crap metal

Test fit patch

Welding in new metal

Finish to primer

kidatari · Post by **kidatari** » Sun Jan 15, 2006 1:22 am

Nice looking work, I can't wait to see the car when it's done.

I wish I had the skill to do those kind of repairs. Good luck with the rest!

magicmike · Post by **magicmike** » Sun Jan 15, 2006 8:35 pm

Hey good job so far! Good to see your doing things right... I think I may have been expecting about 16 gallons of bondo in this thread lol

206er · Post by **206er** » Sun Jan 15, 2006 9:05 pm

what gauge is the sheetmetal? what settings did you have the welder on, and what size wire? looks like you cut a section out of a donor car?

stipro · Post by **stipro** » Mon Jan 16, 2006 5:55 am

206er wrote:what gauge is the sheetmetal?

looks like you cut a section out of a donor car?

I actually used the old front fender that I replaced

206er wrote:what settings did you have the welder on, and what size wire?

I will get back to you on this.

magicmike wrote: Good to see your doing things right... I think I may have been expecting about 16 gallons of bondo in this thread lol

I wanted to do this right because so many people do the bondo bucket thing, and I have a little more respect for my car

, and the only filler on the car is to feather fill the areas where the dents were pulled out.

stipro · Post by **stipro** » Sat Aug 19, 2006 7:08 am

O.K so its been a long time coming. The photo's in my first post were taken in December 05.
A few days later it had gotten much to cold to do anymore work on the car without a heated garage.
So unfortunately with other projects due, I drove my car around for near 8 months like this.

I was getting really depressed and embarresed to drive it around looking like that.

So again after 8ish months, (July 1, 2006) I rolled the car into the garage for a complete body overhaul, not stopping until the car was finally done.

There was about two weeks of metal prep done, cutting and welding new patches to replace old rust.

After that the car was off to another garage where all of the primer/painting would be done.

After numerous coats of color build primer, the car looked like this.

then sanded,

This was all followed by an 11 hour day of wetsanding the primer with 400grit.

Then the color was layed. For some reason the clear had a wierd reaction to the base paint and the paint had "super" orange peel.
A bit discouraging. (notice how grainy the light reflection is)

Next came another 2 days of color sanding with 1000, then 1500grit.

The color sanding was followed up by two days of polishing.

So after 1 month and 20 days of work, and dedication to the car I so love, I got this. Enjoy.

I will add a few more pics in the next day or so, I only just brought the car home yesterday night.

Iam really pleased, and the best part is, I did this all myself.

bmxkelowna · Post by **bmxkelowna** » Sat Aug 19, 2006 7:21 am

wow! the car looks great man
all that hard work really pays off in the end.

entirelyturbo · Post by **entirelyturbo** » Sat Aug 19, 2006 1:27 pm

Damn! That looks sweet!

I really need to learn how to do bodywork...

Post by **Legacy777** » Sat Aug 19, 2006 5:47 pm

Yeah that looks awesome dude!!

skid542 · Post by **skid542** » Sun Aug 20, 2006 2:29 am

Wow. How many cars have you painted prior to this one? Nice work.

AWD_addict · Post by **AWD_addict** » Sun Aug 20, 2006 3:21 am

Looks great! Interesting that you painted the trim but left the chrome strip.

stipro · Post by **stipro** » Sun Aug 20, 2006 5:16 am

skid542 wrote:Wow. How many cars have you painted prior to this one? Nice work.

Well, actually this was my first one, believe it or not. I dont do anything half-assed really, so I did alot of reading and asked alot of questions to people in the know. Now I know

AWD_addict wrote:Looks great! Interesting that you painted the trim but left the chrome strip.

Yeah, thats what I thought. I saw it on a Legacy once and decided that it looked quite attractive. I think it turned out ok.

BAC5.2 · Post by **BAC5.2** » Mon Aug 21, 2006 5:45 am

Wow. I'm jealous.

SuperRallyRoo · Post by **SuperRallyRoo** » Mon Aug 21, 2006 6:22 am

Looks really good... But i'm curious, does it have no clear coat now? So isn't it going to fade really quickly now?

stipro · Post by **stipro** » Tue Aug 22, 2006 1:14 am

SuperRallyRoo wrote:Looks really good... But i'm curious, does it have no clear coat now? So isn't it going to fade really quickly now?

Well actually I sort of saved myself from that happening. The last two coats were shot 50/50, paint w/clear so I could wet sand it, regardless of how it was going to turm out.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

UPDATE: Legacy Re-furbish(ing)Complete!!!-New pics added-

UPDATE: Legacy Re-furbish(ing)Complete!!!-New pics added-