4.11 to 3.9 possible?

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
shemoves
Second Gear
Posts: 289
Joined: Tue Aug 02, 2005 6:53 pm
Location: Glendale, AZ

4.11 to 3.9 possible?

Post by shemoves »

Would it be possible to turn a 4.11 final drive tranny into a 3.9 FD?
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Post by BSOD2600 »

I'm curious why you want to go back to a 3.9?

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Manarius
Fourth Gear
Posts: 1755
Joined: Fri Jul 22, 2005 10:53 pm
Location: USA, PA, Grantham (near Harrisburg)
Contact:

Post by Manarius »

Umm, not without replacing a lot of things in the tranny. Might as well just go get a 3.9 tranny and matching rear diff.
Manarius wrote:The Neo-Cons would call me a defeatist. I'd call me a realist. I'm realistically saying that a snowball has better chances in the blazes of hell than democracy has in Iraq.
1995 Polo Green Subaru SVX (189k miles - 08/2007-Present)
shemoves
Second Gear
Posts: 289
Joined: Tue Aug 02, 2005 6:53 pm
Location: Glendale, AZ

Post by shemoves »

some backstory: I am going to be replacing the tranny in a '92 SS. I have found a great match (STi ver II, 4.11, but short RA ratios).

I am trying to get some more out of the gearing so I don't have to have the car at 3600+ rpms to go 80.

I have considered just swapping out 5th gear, but I don't know where to get a long 5th gear that will fit.
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

You will need to change out the ring and pinion in the transaxle with a 3.90 one.

Kind of a bitch if you ask me...
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
shemoves
Second Gear
Posts: 289
Joined: Tue Aug 02, 2005 6:53 pm
Location: Glendale, AZ

Post by shemoves »

seems like my best bet is a 5th gear from a wrx. I just hope it'll fit...
555BCTurbo
Knowledgeable
Knowledgeable
Posts: 3335
Joined: Wed Feb 16, 2005 9:40 pm
Location: Oregon

Post by 555BCTurbo »

That sounds like even more of a pain in the ass...
Nick

1987 Audi 4000CS quattro...soon to be 20VT
1994 Dodge Ram 2500 4x4 CTD, #11 plate, 30 psi, Scotty II intake, 4" exhaust
shemoves
Second Gear
Posts: 289
Joined: Tue Aug 02, 2005 6:53 pm
Location: Glendale, AZ

Post by shemoves »

dang it...what do the 2.2T guys do when their trannies go?
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Post by BSOD2600 »

My 4EAT is on its way out. I'm planning on getting a 5MT 3.9 put in during December...

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
shemoves
Second Gear
Posts: 289
Joined: Tue Aug 02, 2005 6:53 pm
Location: Glendale, AZ

Post by shemoves »

BSOD2600 wrote:My 4EAT is on its way out. I'm planning on getting a 5MT 3.9 put in during December...
from a WRX?
Post Reply