Dyno time part Deux!

dscoobydoo · Post by **dscoobydoo** » Mon Feb 05, 2007 8:02 pm

Ok, before we started modding, we dyno'd the car to get a baseline.

Sadly, the place we dyno'd at no longer has their dyno.

So we are going to have 2 maps that don't quite have that exacting match with the same equipment, but that is life.

Our first dyno was with no mods and 125,000 on the clock.

This weekend, Rallitek is having a dyno day at Torquefreaks in Portland and I got on the list for the Dyno.

So, with 152,000 on the odo, and with the 06 WRX intercooler, 16G at 9psi, Pod filter, full 3 inch exhaust with divorced wastegate, coffee cup mod, diamond coil pack, and god knows what else we have done to the car.

Curious what the numbers will be.

BAC5.2 · Post by **BAC5.2** » Mon Feb 05, 2007 10:41 pm

185whp and 200lb-ft

Thats my prediction.

555BCTurbo · Post by **555BCTurbo** » Mon Feb 05, 2007 11:42 pm

160whp and 180lb ft

What prize do we get if we win?

douglas vincent · Post by **douglas vincent** » Tue Feb 06, 2007 12:07 am

I'll be there as well!

I will be shooting for the 300 mark! But only if I get a MBC of some sort. Otherwise probably 230-240 range @ 16psi.

My prediction for you is 170 whp 190 torque

dzx · Post by **dzx** » Tue Feb 06, 2007 12:10 am

175hp 190 ft/lbs

555BCTurbo · Post by **555BCTurbo** » Tue Feb 06, 2007 4:36 am

Doug, call me, I can give you instructions on how to make an MBC out of Home Depot parts.

503 932 9622

Imprezive · Post by **Imprezive** » Tue Feb 06, 2007 4:49 am

What kind of dyno is it? I bet 170whp if its on a mustang.

douglas vincent · Post by **douglas vincent** » Tue Feb 06, 2007 4:59 am

Kelly loaned me a Greddy "Trust" MBC. Its super nice! They retail for like $200.

dscoobydoo · Post by **dscoobydoo** » Tue Feb 06, 2007 2:51 pm

How about this: if someone guesses my EXACT PEAK HP AND TQ, I will send them a Carbon Fiber STI strut tower bar.

One vote only per person.

BAC5.2 · Post by **BAC5.2** » Tue Feb 06, 2007 3:21 pm

I'll stick with my above guess.

dzx · Post by **dzx** » Tue Feb 06, 2007 10:49 pm

auto or manual?

n2x4 · Post by **n2x4** » Tue Feb 06, 2007 11:39 pm

I think dyno numbers for what your mods are will be really nice for this board. I know I'd like to find out.

My exact guess: 187 HP 193 TQ

MPtyza · Post by **MPtyza** » Wed Feb 07, 2007 12:00 am

I'll guess 183 HP 196 TQ

dscoobydoo · Post by **dscoobydoo** » Wed Feb 07, 2007 12:47 am

Manual of course

dwreck30 · Post by **dwreck30** » Wed Feb 07, 2007 3:50 am

181whp, 197 ft/lbs. Is this for a strut bar for our cars? j/k

Imprezive · Post by **Imprezive** » Wed Feb 07, 2007 9:15 pm

dscoobydoo wrote: and god knows what else we have done to the car.

Thats a big unkown! hahaha

And what kind of dyno is it???

Anywho, my official guess is 174 WHP & 191 TQ

Psychoreo · Post by **Psychoreo** » Wed Feb 07, 2007 10:00 pm

181whp & 193TQ

no matter how it comes out, it'll be cool to see!

dscoobydoo · Post by **dscoobydoo** » Wed Feb 07, 2007 11:35 pm

Yes, this strut bar will fit your car.

Total mod list for the engine:
Divorced gate downpipe
full 3 inch exhaust ( with cat and resonator)
Diamond Coil pack
Td05-16g running wastegate boost (8-9lbs)
Coffee cup mod
Grounding wire mod
K&N pod filter
Perrin Catch can
WRX Coolant tank ( relocated)
06 WRX intercooler
Samco intercooler hoses

That is about it.

dzx · Post by **dzx** » Wed Feb 07, 2007 11:57 pm

for some reason I thought you were running 16psi.

0perose · Post by **0perose** » Thu Feb 08, 2007 3:16 am

172hp 195ft-lb

BAC5.2 · Post by **BAC5.2** » Thu Feb 08, 2007 4:16 am

DZX - At 16psi, I made 214/249 on pump gas with a similar setup.

dzx · Post by **dzx** » Thu Feb 08, 2007 4:29 am

yeah, I remember that. I never had my car dynoed when the 16G was on it.

douglas vincent · Post by **douglas vincent** » Thu Feb 08, 2007 6:19 am

Lets do some math for calculations of predicitions.....

16 psi = 214.....

0 boost is about 90

(214-90)/16 = 7.75 hp per psi

So....

(9 x 7.75) + 90 = 159.75 whp!

Dynamic Entry · Post by **Dynamic Entry** » Thu Feb 08, 2007 9:11 am

I'll take a stab in the dark.

184 hp & 201 trq

dscoobydoo · Post by **dscoobydoo** » Thu Feb 08, 2007 4:21 pm

douglas vincent wrote:Lets do some math for calculations of predicitions.....

16 psi = 214.....

0 boost is about 90

(214-90)/16 = 7.75 hp per psi

So....

(9 x 7.75) + 90 = 159.75 whp!

BUT

I have the stock Dyno graph that shows I put down close to 150 at the wheels stock, SOOOOOOOOOO

I was thinking in the realm of 180-190 myself.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Dyno time part Deux!

Dyno time part Deux!

Re: Dyno time part Deux!