After reading over previous posts...
i had a couple questions!
1) it seems like it could be the VSS1 or 2?
2) how do you check the TCU?
3) what is needed to check the TCU?
4) how do you check codes on the ECU as well..?
5) my power light blinked a couple more times then usual. so this is why im asking.. if its normal or not?
Power light blinks after starting...
Moderators: Helpinators, Moderators
-
terranaj98
- In Neutral
- Posts: 34
- Joined: Fri Jun 01, 2007 9:19 pm
Power light blinks after starting...
90' Subaru Legacy LS Wagon - 214k
PCV Changed
ECU Resetted
Tailgate Makeover. Thx Homedepot :P
PCV Changed
ECU Resetted
Tailgate Makeover. Thx Homedepot :P
-
Manarius
- Fourth Gear
- Posts: 1755
- Joined: Fri Jul 22, 2005 10:53 pm
- Location: USA, PA, Grantham (near Harrisburg)
- Contact:
If it blinks a few more times than normal, that means it has a stored code.
Read this page: http://www.surrealmirage.com/subaru/engine.html
Read this page: http://www.surrealmirage.com/subaru/engine.html
1995 Polo Green Subaru SVX (189k miles - 08/2007-Present)Manarius wrote:The Neo-Cons would call me a defeatist. I'd call me a realist. I'm realistically saying that a snowball has better chances in the blazes of hell than democracy has in Iraq.