Loss of power/stalling before 2nd gear

Flywheel, Clutch, Transmission, Axles, etc...

Moderators: Helpinators, Moderators

Post Reply
gaugedk
In Neutral
Posts: 23
Joined: Mon Mar 15, 2004 2:23 am

Loss of power/stalling before 2nd gear

Post by gaugedk »

Hello all, I have been a long time reader. I have searched this problem but couldnt find much help.

so heres the deal I have automatic 94 legacy turbo. it keeps stalling out or the rpms drop to nothing once the car trys to go into 2nd gear. I try to hit the gas but nothing happens. this lasts for a mile or two and then all of a sudden its fine again. this has happened twice.

I tryed to get the code but its too light out. Ill have to get them tonight.

Any ideas? I was thinking possibly fuel filter, vacume puncture, or sensor problem.

Thanks for your help in advance.
Top
thehookeup
Third Gear
Posts: 619
Joined: Wed Feb 22, 2006 5:14 am
Location: portland OR

Post by thehookeup »

could be a duty solenoid in the tranny
-93 2.2T (RIP), 93 N/A best car on earth.
-00 legGT, 18" PIAA sport mesh wheels, front/rear Rallitek sways, lowered whitelines, coming soon: 2.5L sti internals, 20g heads P&P, twin charged. motor is almost ready to go in.
Andrew
Top
ericem
Fifth Gear
Posts: 3242
Joined: Mon Oct 16, 2006 9:44 pm
Location: Toronto,ON Canada

Post by ericem »

You getting a check engine light? Wonder if a exhaust converter might need to be replaced.
1993 Subaru Legacy L AWD Wagon R.I.P
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
Top
gaugedk
In Neutral
Posts: 23
Joined: Mon Mar 15, 2004 2:23 am

Post by gaugedk »

My check engine light has always been on since Ive owned the car. The power light flashes when the car stalls out.

I didnt get the code yet, Ill try again today.
Top
ericem
Fifth Gear
Posts: 3242
Joined: Mon Oct 16, 2006 9:44 pm
Location: Toronto,ON Canada

Post by ericem »

Check out here.

http://www.surrealmirage.com/subaru/subaru.html
1993 Subaru Legacy L AWD Wagon R.I.P
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
Top
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Contact Legacy777

Post by Legacy777 »

You need to pull the ECU & TCU codes. Both procedures are on my site under the notes & tips section, engine related, trans related.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Top
gaugedk
In Neutral
Posts: 23
Joined: Mon Mar 15, 2004 2:23 am

Post by gaugedk »

Alright I checked the codes and heres what I got

For the existing problem, the power light just blinked I stoped counting after 200 blinks

For the previous problem the power light Blinked 5 times, Long Long Short Short Short.

Thanks guys.
Top
BSOD2600
Fourth Gear
Posts: 1636
Joined: Tue Sep 12, 2006 6:49 am
Location: Seattle, WA

Post by BSOD2600 »

gaugedk wrote:For the previous problem the power light Blinked 5 times, Long Long Short Short Short.
That would be the Air flow sensor.

'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Top
Legacy777
Site Admin
Site Admin
Posts: 27932
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:
Contact Legacy777

Post by Legacy777 »

No.....that would be the engine revolution signal, since he was checking the TCU.

There is a line going from the ECU to TCU that tells the TCU what the engine rpm is.

Did you also check the ECU?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Top
gaugedk
In Neutral
Posts: 23
Joined: Mon Mar 15, 2004 2:23 am

Post by gaugedk »

Nope I havent checked those yet. as soon as I can get some time Ill post them. Thanks
Top
Post Reply

Return to “Drivetrain”