16 year old's legacy
Moderator: Moderators
-
- Title Whore
- Posts: 2692
- Joined: Mon Dec 01, 2003 7:19 am
- Location: Valdosta, GA
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
- Knowledgeable
- Posts: 9809
- Joined: Mon Jun 16, 2003 11:20 pm
- Location: Beverly, MA
I have to get those for my women when I overheat them. I keep a few of 'em in stock next to the ice cube trays and frozen pizzas.
Midnight in a Perfect World on Amazon or order anywhere. The first book in a quartet chronicling the rise of a man from angry criminal to philanthropist. Midnight... is a distopic noirish novel featuring 'Duchess', a modified 1990 Subaru Legacy wagon.
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
thanks, ill keep that in mind next time I use those (serious not sarcasm)555BCTurbo wrote:Nategreat923 wrote:i asked my friend to show me what it would look like with an intercooler, so he messed with it a lil, so yeah its photochop stuff
Fixed some stuff for you
i have a question. my friend said i have a EJ22 because my soob is manny, but its not turboed so i didnt think it was.
NaTeWoOt
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
They were all 2.2 motors in the Legacy from '90-'94 reguardless if it was manual or auto, but if it's a turbo model, then it's an EJ22T. If it's N/A (nat. aspirated) then it's an EJ22.
EJ18's showed up in low end Imprezas, and EJ25's didn't show up in the Legacy until '96.
EJ18's showed up in low end Imprezas, and EJ25's didn't show up in the Legacy until '96.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
ohhhhh, thanks a lot. my friend thought it was a ej20.dropdfocus wrote:They were all 2.2 motors in the Legacy from '90-'94 reguardless if it was manual or auto, but if it's a turbo model, then it's an EJ22T. If it's N/A (nat. aspirated) then it's an EJ22.
EJ18's showed up in low end Imprezas, and EJ25's didn't show up in the Legacy until '96.
this will be a pain in the butt question, and ive tried lookin in other posts but im a noob, how hard and expensive would it to turbo it. like whats the minimum it would be to turbo it with the smallest turbo? thanks in advance
NaTeWoOt
-
- Fifth Gear
- Posts: 2385
- Joined: Tue Mar 13, 2007 12:56 am
- Location: 10-9-oh(!), wa
(someone's gonna slap you w/ the search stick)Nategreat923 wrote:this will be a pain in the butt question, and ive tried lookin in other posts but im a noob, how hard and expensive would it to turbo it. like whats the minimum it would be to turbo it with the smallest turbo? thanks in advance
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
Well...
You'd be changing out quite a bit to do it.
- different ECU
- different full exhaust
- different intake manifold
- different intake tubing
- different injectors (possibly optional depending on turbo size)
- turbo
- intercooler (again optional, but highly recommended)
- many misc. hoses & additional odds & ends
All said & done, you could be selective in what you pay & where you get it from and likely pay $1k or less.
Picking up a used VF-11 (stock Legacy turbo) and other tid bits wouldn't be too hard.
Use the search function and look up turbo swap, or engine swap. Browse the topic's content and remember to take everything with a grain of salt. Everyone has a different take or opinion on situations around here.
You'd be changing out quite a bit to do it.
- different ECU
- different full exhaust
- different intake manifold
- different intake tubing
- different injectors (possibly optional depending on turbo size)
- turbo
- intercooler (again optional, but highly recommended)
- many misc. hoses & additional odds & ends
All said & done, you could be selective in what you pay & where you get it from and likely pay $1k or less.
Picking up a used VF-11 (stock Legacy turbo) and other tid bits wouldn't be too hard.
Use the search function and look up turbo swap, or engine swap. Browse the topic's content and remember to take everything with a grain of salt. Everyone has a different take or opinion on situations around here.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
BTW, look just below and to the right of your power steering res. and you'll see a casting area that shows EJ22 right on the block. The EJ20 only showed up in the JDM Imprezas and the early US market WRX's.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
Ohhhh. thats exactly what I was looking for. Thanks a lottttt.dropdfocus wrote:Well...
You'd be changing out quite a bit to do it.
- different ECU
- different full exhaust
- different intake manifold
- different intake tubing
- different injectors (possibly optional depending on turbo size)
- turbo
- intercooler (again optional, but highly recommended)
- many misc. hoses & additional odds & ends
All said & done, you could be selective in what you pay & where you get it from and likely pay $1k or less.
Picking up a used VF-11 (stock Legacy turbo) and other tid bits wouldn't be too hard.
Use the search function and look up turbo swap, or engine swap. Browse the topic's content and remember to take everything with a grain of salt. Everyone has a different take or opinion on situations around here.
and IMO i like front mount intercoolers better then top
NaTeWoOt
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
Until you go with a larger turbo (which requires many more supporting mods, like fuel delivery upgrades & such) you'd lose HP with a front mount vs. the top mount. The longer length of piping to the front & such would cause longer spool up times. This would take you longer to achieve the desired effect you are going for. The top mount being right next to the turbo allows for shorter spool up time. Basically you hit full boost much quicker.
Sorry, the front mount might look cooler, but it isn't the most desirable item when running stock equipment.
Sorry, the front mount might look cooler, but it isn't the most desirable item when running stock equipment.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
well, they say you learn new things every day. thanks for the info. yeah, i just want a small turbo (if i really do even want one) for a little fun, because this is my car for the mountain (snowboarding with friends and such) so it wouldn't be a big turbo, I'll probably keep it NA, but I just might turbo itdropdfocus wrote:Until you go with a larger turbo (which requires many more supporting mods, like fuel delivery upgrades & such) you'd lose HP with a front mount vs. the top mount. The longer length of piping to the front & such would cause longer spool up times. This would take you longer to achieve the desired effect you are going for. The top mount being right next to the turbo allows for shorter spool up time. Basically you hit full boost much quicker.
Sorry, the front mount might look cooler, but it isn't the most desirable item when running stock equipment.
NaTeWoOt
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
- Knowledgeable
- Posts: 3335
- Joined: Wed Feb 16, 2005 9:40 pm
- Location: Oregon
-
- Title Whore
- Posts: 2692
- Joined: Mon Dec 01, 2003 7:19 am
- Location: Valdosta, GA
Nate,
I'll have some stuff you would need for a turbo swap coming up in the next few months. Harness, ECU, exh, heads and intake mani, and tdo04 with TMIC. Basically, everything you'd need except the shortblock. I'll keep you posted.
I'll have some stuff you would need for a turbo swap coming up in the next few months. Harness, ECU, exh, heads and intake mani, and tdo04 with TMIC. Basically, everything you'd need except the shortblock. I'll keep you posted.
[b]'92 L Sedan[/b]
EJ20g 4.11 5sp LSD
[quote]e46 owners tend to be twats.
[/quote]
EJ20g 4.11 5sp LSD
[quote]e46 owners tend to be twats.
[/quote]
you know you could always just buy an ej20g with a 5m/t off of ebay for about $1k too.
my friend and i swapped one into his 95 Impreza L. It was pretty straight forward if you have a basic idea of what you're doing. The wiring took us the longest to do, but everything was done in about two weeks and for $1k, that's the biggest performance increase you can get lol.
he went from like 115hp to 240hp and 4.44 gears lol.
my friend and i swapped one into his 95 Impreza L. It was pretty straight forward if you have a basic idea of what you're doing. The wiring took us the longest to do, but everything was done in about two weeks and for $1k, that's the biggest performance increase you can get lol.
he went from like 115hp to 240hp and 4.44 gears lol.
-Aaron
2000 Audi S4 - 2.7L Twin-turbo, 6 Speed
[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
2000 Audi S4 - 2.7L Twin-turbo, 6 Speed
[quote="evolutionmovement"]It was me. And those are my balls. Happy Sunday![/quote]
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
And for the record... I believe the NAs were an EJ22E while the turbos were EJ22Ts (minus the (s) for non plural use, aka singular form, so its an EJ22T)... lol
~Spencer
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
94 Legacy Turbo (550 Robtune/ej20h v2 Sti RA drivetrain)
94 Legacy Ti Wagon (5mt ej22e)
91 rhd Legacy GT Wagon (factory 5mt, ej20g)
93 rhd Legacy GT type S2 Sedan (4eat, ej20g)
91 rhd Legacy Ti Type S 1.8
03 Lincoln LS V8 Sport
08 300 SRT8
-
- Fourth Gear
- Posts: 1937
- Joined: Sun Sep 07, 2003 5:57 am
- Location: Williamsport, PA
- Contact:
-
- In Neutral
- Posts: 22
- Joined: Wed Mar 21, 2007 11:34 pm
- Location: Snohomish Wa
-
- Fifth Gear
- Posts: 3526
- Joined: Wed Jul 18, 2007 5:07 pm
- Location: Whammy!