94 Legacy part out

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

94 Legacy part out

Post by Freepistol »

I have the turbo and pipes.
Alternator and starter.
New front strut in the trunk and the other new one on the drivers side front that can be removed.
I have pending deals for the transmission and rear sway bar assembly.

Windshield, fenders, front bumper, sun roof---no good.
Most everything else there except the engine.

I do have the grille pictured farther down the thread.
Ben
Berwick, Pa 18603
Last edited by Freepistol on Sun Dec 23, 2007 3:00 am, edited 1 time in total.
Top
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:
Contact vrg3

Post by vrg3 »

If you can get the ABS sensor out of the front driver side hub (the sensor pickup, not the toothed ring), I'd like to buy it.

scuzzy might be interested in the turbo pipes.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Top
denver_whitest185
First Gear
Posts: 205
Joined: Sat Oct 06, 2007 8:20 pm
Location: Fort Collins, CO

Post by denver_whitest185 »

i sent you a pm about the boost control solenoid

-Ted
1994 maroon Subaru Legacy SS sedan
1990 white Toyota Celica Alltrac - well modded :D
Bring the track to you
http://www.youtube.com/watch?v=mXfUbFR-x7g
Top
jamal
Vendor
Vendor
Posts: 2485
Joined: Thu Dec 11, 2003 11:34 am
Location: Missoula
Contact:
Contact jamal

Post by jamal »

Left rear turn signal to 90220?
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

vrg3 wrote:If you can get the ABS sensor out of the front driver side hub (the sensor pickup, not the toothed ring), I'd like to buy it.

scuzzy might be interested in the turbo pipes.
I should be able to get that for you. I need a couple of days because the car is outside in the snow storm right now.
Ben
Top
vrg3
Vikash
Posts: 12517
Joined: Sun Nov 03, 2002 2:13 am
Location: USA, OH, Cleveland (sometimes visiting DC though)
Contact:
Contact vrg3

Post by vrg3 »

Okay, whenever you're ready... I've been looking for one of these sensors for years. It can be hard to get them out of the hub without bending/breaking them.
"Just reading vrg3's convoluted, information-packed posts made me feel better all over again." -- subyluvr2212
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

jamal wrote:Left rear turn signal to 90220?
Hi Jarnal,
Driver's side rear turn signal looks good. Is it just the lens you need or does it come as one unit with the light holder?
Ben
Top
ciper
Knowledgeable
Knowledgeable
Posts: 4388
Joined: Tue Oct 15, 2002 8:16 pm
Location: SFCA

Post by ciper »

ECU and Harness still intact? MAF and intake piping still available? Any parts from above the engine left? (intake parts, injectors)

Does anyone know how heavy the factory downpipe is?
Top
jamal
Vendor
Vendor
Posts: 2485
Joined: Thu Dec 11, 2003 11:34 am
Location: Missoula
Contact:
Contact jamal

Post by jamal »

Freepistol wrote:
jamal wrote:Left rear turn signal to 90220?
Hi Jarnal,
Driver's side rear turn signal looks good. Is it just the lens you need or does it come as one unit with the light holder?
Ben
I don't think they come apart. If they do then the lens is all I'd need.
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

ciper wrote:ECU and Harness still intact? MAF and intake piping still available? Any parts from above the engine left? (intake parts, injectors)

Does anyone know how heavy the factory downpipe is?
Hi Ciper,
ECU is still in the car. I removed the engine so nothing was cut. Intake and injectors are still on the engine. I am going to rebuild it and stick it in an airplane so I won't be using any of that. Tell me what you want and make an offer.
Thanks!
Ben
Top
scuzzy
Third Gear
Posts: 775
Joined: Sun Feb 20, 2005 1:53 am

Post by scuzzy »

I need your air bypass valve if you still have it, and I could probably use your intake pieces pre and post turbo just because I can cut on them.

what say you?
91 Legacy Wagon, Total Rally Car.

#82 M4 TRSCCA Rallycross

http://www.youtube.com/mobilepolice/
Top
greg donovan
Fourth Gear
Posts: 1947
Joined: Fri Oct 03, 2003 6:22 pm
Location: Fargo, ND

Post by greg donovan »

vrg3 wrote:Okay, whenever you're ready... I've been looking for one of these sensors for years. It can be hard to get them out of the hub without bending/breaking them.
i broke 4.

:(
96 Impreza L sedan
97 legacy outback limited
00 Impreza RS sedan
Top
gaugedk
In Neutral
Posts: 23
Joined: Mon Mar 15, 2004 2:23 am

Post by gaugedk »

I need your Pressure Sensor.
Top
Trace
First Gear
Posts: 106
Joined: Thu Sep 27, 2007 10:41 pm
Location: Vancouver, BC

Post by Trace »

Is it a non-turbo or a turbo?

I'm looking for a front bumper cover and the front steel reinforcement of a turbo model.

thanks.
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

gaugedk wrote:I need your Pressure Sensor.
Hi gaugedk,
Please give me a couple of days, I have some unexpected business that needs to get done right now.
Thanks!
Ben
Top
gaugedk
In Neutral
Posts: 23
Joined: Mon Mar 15, 2004 2:23 am

Post by gaugedk »

No problem
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Car in garage and found the grille

Post by Freepistol »

I found the grille in the trunk! Nothing appears to be broken. I'm not sure what the bottom grille is in the picture, but it is for sale, too. The grey one isn't as nice because of the faded paint.
The unknown grille has all of the plastic pins broken on the bottom row.
I will take more pictures of either one if you are interested.
Image

I have the car in the garage to get all the parts that were requested. If anything else is needed, please let me know.
Thanks!
Ben
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

jamal wrote:
Freepistol wrote:
jamal wrote:Left rear turn signal to 90220?
Hi Jarnal,
Driver's side rear turn signal looks good. Is it just the lens you need or does it come as one unit with the light holder?
Ben
I don't think they come apart. If they do then the lens is all I'd need.
Hi Jamal,
I have the turn signal unit for you. The bulb plate comes apart from the lens. Do you still need it?
Ben
Top
pankopp
In Neutral
Posts: 4
Joined: Mon Nov 19, 2007 2:02 am

Post by pankopp »

hey do you still have the adjuster that is used to adjust the Alt. up and down to tighten the belt>? I need the part that you tighten or loosen to move the whole assembly up and down. Mine has a broken bolt in it that will not come out.

Let me know!
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

pankopp wrote:hey do you still have the adjuster that is used to adjust the Alt. up and down to tighten the belt>? I need the part that you tighten or loosen to move the whole assembly up and down. Mine has a broken bolt in it that will not come out.

Let me know!
Yep, I have that.
What's your zip code?
I'm 18603.
Ben
Top
Tim Catton
In Neutral
Posts: 10
Joined: Sun Oct 21, 2007 12:53 am

Post by Tim Catton »

Is the instrument cluster still available? Would you be willing to ship it?
tjc
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

Tim Catton wrote:Is the instrument cluster still available? Would you be willing to ship it?
Hi Tim,
Yes, the cluster is still in the car and I will ship it. Tell me what all you need and how much you think it is worth.
Thanks!
Ben
Top
Tim Catton
In Neutral
Posts: 10
Joined: Sun Oct 21, 2007 12:53 am

Post by Tim Catton »

I sent you a pm on the instrument cluster
tjc
Top
dropdfocus
Fourth Gear
Posts: 1937
Joined: Sun Sep 07, 2003 5:57 am
Location: Williamsport, PA
Contact:
Contact dropdfocus

Post by dropdfocus »

Automatic or manual? If maunal, interested in the tranny & full pedal assembly.

Also interested in the stock trunk spoiler.

BTW, I can pick up the parts since I'm only like 30-35 miles away.
Jason
'92 LSS "Trixie" - TD04, '06 WRX TMIC, Invidia D/P & TXS U/P, 3" APEX'i CBE, custom intake, TXS MBC & BPV
Perrin LCP, WRX & H6 brakes, S/S lines, Cusco H-brace & RSTB, AGX's, Progress springs, SimplySubie fender braces
Top
Freepistol
In Neutral
Posts: 17
Joined: Wed Dec 05, 2007 6:03 pm

Post by Freepistol »

dropdfocus wrote:Automatic or manual? If maunal, interested in the tranny & full pedal assembly.

Also interested in the stock trunk spoiler.

BTW, I can pick up the parts since I'm only like 30-35 miles away.
Oh yeah, I forgot to say I have the spoiler, too.
Ben
Top
Post Reply

Return to “Parts Shed”