$47 to ship a cam & crank sensor?! f*** you subaruparts
Moderator: Moderators
-
- Third Gear
- Posts: 961
- Joined: Sun Nov 23, 2003 4:16 am
- Location: Moscow, ID and Pullman WA
- Contact:
$47 to ship a cam & crank sensor?! f*** you subaruparts
It's bad enough that combined they cost 395.02, they are magnets wrapped in plastic with wires attached for christs sake. But almost 50 bucks to ship? eat a dick subaruparts.com.
uggg and the blackbart automart is closed for a while too... good thing I work 2 blocks from home.
So I may want to be purchasing a cam or crank or both used and in working order soon, depends on when I what I find out tomorrow. I hope its just the wiring.
uggg and the blackbart automart is closed for a while too... good thing I work 2 blocks from home.
So I may want to be purchasing a cam or crank or both used and in working order soon, depends on when I what I find out tomorrow. I hope its just the wiring.
That's why I use Liberty Subaru in New Jersey. Their prices have always been within a few cents of Subaruparts, sometime higer, but usually lower. The best part is that they CHARGE THE ACTUAL SHIPPING COST
They once even upgraded to UPS Red Saturday delivery and charged me the UPS ground rate, when there was a delay between the DC and their shop.
888-782-9493
http://www.libertysubaru.com/en_US/
Their website isn't as good as the others, but the parts guys are real good and helpful, even with parts for my SVX and Brat.
You need to ask for the Subaru-SVX.net pricing.

They once even upgraded to UPS Red Saturday delivery and charged me the UPS ground rate, when there was a delay between the DC and their shop.
888-782-9493
http://www.libertysubaru.com/en_US/
Their website isn't as good as the others, but the parts guys are real good and helpful, even with parts for my SVX and Brat.
You need to ask for the Subaru-SVX.net pricing.
Dave
[size=75]-97 Legacy (ain't never gonna die)
-92 SVX (attention whore)
-86 Brat (more fun than the SVX)
-92 SVX Racer (lightest SVX)[/size]
[size=75]-97 Legacy (ain't never gonna die)
-92 SVX (attention whore)
-86 Brat (more fun than the SVX)
-92 SVX Racer (lightest SVX)[/size]
-
- Second Gear
- Posts: 376
- Joined: Fri Mar 18, 2005 4:05 pm
- Location: chicago , IL , usa
- Contact:
Re: $47 to ship a cam & crank sensor?! f*** you subarup
if you give me part #s I'll see what I can do.biggreen96 wrote:It's bad enough that combined they cost 395.02, they are magnets wrapped in plastic with wires attached for christs sake. But almost 50 bucks to ship? eat a dick subaruparts.com.
uggg and the blackbart automart is closed for a while too... good thing I work 2 blocks from home.
So I may want to be purchasing a cam or crank or both used and in working order soon, depends on when I what I find out tomorrow. I hope its just the wiring.
94 BC w/ AWD Sold 6/25/08
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
I noticed the same thing with that company. I order two small parts (purge value and knock senser) and it was $20 to ship. I was surprised they charged $8 for the ks and $12 for the purge. The overall price was cheap enough I went through with the order. I have a feeling that it is a limitation with their website's ability to calculate shipping on the fly so they error on the high (high) side. It should have been only $10 max for both those small parts.
James
93 Legacy Turbo SS Burgundy - Son's Car
Mods: KYB GR2, K&N, TD04/WRX TMIC, Hallman Pro MBC @ 11.5 psi, 02 WRX 5sp Tranny, AU CB 97-00 WRX 3" Turbo back Exhaust / Future Mods: MSD DIS2
02 Toyota Tundra v8 4x4 TRD & 97 Suzuki Bandit 1200s- Mine
93 Legacy Turbo SS Burgundy - Son's Car
Mods: KYB GR2, K&N, TD04/WRX TMIC, Hallman Pro MBC @ 11.5 psi, 02 WRX 5sp Tranny, AU CB 97-00 WRX 3" Turbo back Exhaust / Future Mods: MSD DIS2
02 Toyota Tundra v8 4x4 TRD & 97 Suzuki Bandit 1200s- Mine
-
- Knowledgeable
- Posts: 9809
- Joined: Mon Jun 16, 2003 11:20 pm
- Location: Beverly, MA
That's weird. I've only ordered larger packages and the shipping was cheaper than that. I'd definitely just get some used sensors somewhere.
Midnight in a Perfect World on Amazon or order anywhere. The first book in a quartet chronicling the rise of a man from angry criminal to philanthropist. Midnight... is a distopic noirish novel featuring 'Duchess', a modified 1990 Subaru Legacy wagon.
-
- Second Gear
- Posts: 376
- Joined: Fri Mar 18, 2005 4:05 pm
- Location: chicago , IL , usa
- Contact:
shipping calculators usually have a handling charge built in and the basic UPS shipping charge is about $10 even if it's across the street. so $20 if it's cross country makes sense to meLurch wrote:I noticed the same thing with that company. I order two small parts (purge value and knock senser) and it was $20 to ship. I was surprised they charged $8 for the ks and $12 for the purge. The overall price was cheap enough I went through with the order. I have a feeling that it is a limitation with their website's ability to calculate shipping on the fly so they error on the high (high) side. It should have been only $10 max for both those small parts.
94 BC w/ AWD Sold 6/25/08
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
-
- Third Gear
- Posts: 961
- Joined: Sun Nov 23, 2003 4:16 am
- Location: Moscow, ID and Pullman WA
- Contact:
well 400 bucks is almost half my monthly income, so I need to find some used ones if mine turn out to be bad. I don't think they could both die at the exact same moment.
You have to drive and you and have to try if you want the win, you don't achieve anything if you just cruise around - Jari-Matti Latvala
Long live the forums! Down with FB!
Long live the forums! Down with FB!
-
- Third Gear
- Posts: 961
- Joined: Sun Nov 23, 2003 4:16 am
- Location: Moscow, ID and Pullman WA
- Contact:
-
- Second Gear
- Posts: 376
- Joined: Fri Mar 18, 2005 4:05 pm
- Location: chicago , IL , usa
- Contact:
all this talk of ridiculous prices made me look at one suppliers catalog, and laugh. they've got a bunch of bits priced out under a buck. like the front bumper chrome strip, the hood latch assembly, and some other crapola. I'm fighting myself not to buy it all as spares 

94 BC w/ AWD Sold 6/25/08
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
*Sorry to hijack*
Wait a minute, you can get the front bumper crome strip for less than a $1.00 or do you mean a big BUCK as in $100?
If you can get if for less than $1.00 and are willing to help a man out, shoot me a PM
.
And yeah man, screw that 12% shipping. That's pretty messed up business ethics.
Wait a minute, you can get the front bumper crome strip for less than a $1.00 or do you mean a big BUCK as in $100?
If you can get if for less than $1.00 and are willing to help a man out, shoot me a PM

And yeah man, screw that 12% shipping. That's pretty messed up business ethics.
Lee
93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.
93' SS, 5mt swapped, 182k, not stock...
96' N/A OBW 5sp, 212k, Couple mods... RIP
99' N/A OBW, 4eat, mostly stock.
-
- Third Gear
- Posts: 961
- Joined: Sun Nov 23, 2003 4:16 am
- Location: Moscow, ID and Pullman WA
- Contact:
well I took the sensors out and wiped the grime off them and the car started right up. I can put that purchase off for a while, whew.
You have to drive and you and have to try if you want the win, you don't achieve anything if you just cruise around - Jari-Matti Latvala
Long live the forums! Down with FB!
Long live the forums! Down with FB!
Seriously... I need a front and rear strip. lolskid542 wrote:If you can get if for less than $1.00 and are willing to help a man out, shoot me a PM.
Matthew aka F[b][color=red]k[/color][/b]yx
1991 Legacy Sport Sedan "Jillian" - [url=http://bbs.legacycentral.org/viewtopic.php?t=39548]EJ20G swap[/url]
1991 Legacy Sport Sedan "Jillian" - [url=http://bbs.legacycentral.org/viewtopic.php?t=39548]EJ20G swap[/url]
-
- Fourth Gear
- Posts: 1947
- Joined: Fri Oct 03, 2003 6:22 pm
- Location: Fargo, ND
-
- Third Gear
- Posts: 961
- Joined: Sun Nov 23, 2003 4:16 am
- Location: Moscow, ID and Pullman WA
- Contact:
-
- Second Gear
- Posts: 376
- Joined: Fri Mar 18, 2005 4:05 pm
- Location: chicago , IL , usa
- Contact:
oops, missed thisskid542 wrote:*Sorry to hijack*
Wait a minute, you can get the front bumper crome strip for less than a $1.00 or do you mean a big BUCK as in $100?
If you can get if for less than $1.00 and are willing to help a man out, shoot me a PM.
And yeah man, screw that 12% shipping. That's pretty messed up business ethics.
YGPM
94 BC w/ AWD Sold 6/25/08
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99
92 BJ Rust bucket gone
90 BC (I think) Stripper, gone since 2k
86 GL10 Turbo 4wd, Gone since 99