complete set JDM EJ20G heads - SOLD, SOLD, SOLD

Got something for sale? Need to sell a part? Got some stuff on auction that you want to let us know about?

(Legacy Central BBS is not responsible for any arbitration between its users relative to this forum.
Play nice and deal straight)

Moderators: Helpinators2, Moderators

Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814

Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Post Reply
manxaru
In Neutral
Posts: 11
Joined: Sun Mar 09, 2008 9:05 am

complete set JDM EJ20G heads - SOLD, SOLD, SOLD

Post by manxaru »

SOLD, thanks guys!

Complete set of JDM EJ20G "hydraulic rocker heads". I ran these on my car for 2000 miles and they ran great! I am told these heads are good for 7500 rpm, but I had my redline set at 7000.

Everyone knows the JDM 2.0 heads flow great and the only beef with the early "hydraulic rocker style" heads is that parts can be hard to get. Well, here is a complete set of heads with all the spare parts you will ever need.

In addition to complete set of heads (including springs, cam, retainers and covers, etc) I am including the following extra parts with this sale:

• metal timing gears (if you don't need them, we can delete to reduce shipping cost)
• set of 12 head bolts (if you don't need them, we can delete to reduce shipping cost)
• brand new set of intake, exhaust and breather gaskets
• 4 spare HLA's, tested & working (these are about $20 each, plus shipping from Europe or Japan)
• 4 spare HLA clips (cheap, but must be shipped from Europe or Japan)
• spare set of 2 exhaust & 2 intake valves
• spare set of 4 valve springs & retainers

I am asking $425, plus shipping for all of the parts shown above. I have a FEDEX ground account, so shipping is inexpensive.

I also have ignition coils, cams, valves, springs, HLA's, and valve covers from a second set of EJ20G hydraulic rocker heads for sale in another listing in this section.

Here are a few pics, more available upon request:

http://www.flickr.com/photos/65926977@N00/2392474103
http://www.flickr.com/photos/65926977@N00/2393302748
http://www.flickr.com/photos/6592697...in/photostream
http://www.flickr.com/photos/6592697...in/photostream
http://www.flickr.com/photos/6592697...in/photostream
http://www.flickr.com/photos/65926977@N00/2392480647
Last edited by manxaru on Fri Apr 11, 2008 4:20 am, edited 1 time in total.
Top
AWD_addict
Fifth Gear
Posts: 2774
Joined: Sun Nov 23, 2003 12:22 am
Location: Western WA!

Post by AWD_addict »

I'm interested in the gaskets, HLA parts, valves, springs, and retainers if you decide to separate these parts.
90 L+ wgn
Top
beatersubi
Fifth Gear
Posts: 2385
Joined: Tue Mar 13, 2007 12:56 am
Location: 10-9-oh(!), wa

Post by beatersubi »

Where are you shipping from?
93 legacy wagon L, 22T swapped (TW imitator) now with five forward speeds. (Gone, but never forgotten)
johndrivesabox wrote: Rally, my kyboard is brok, his has nohing o do wih h liquor.
Originalcyn wrote:Apparently everyone hates Gabe.
Top
manxaru
In Neutral
Posts: 11
Joined: Sun Mar 09, 2008 9:05 am

Post by manxaru »

beatersubi wrote:Where are you shipping from?
93117
Top
manxaru
In Neutral
Posts: 11
Joined: Sun Mar 09, 2008 9:05 am

Post by manxaru »

AWD_addict wrote:I'm interested in the gaskets, HLA parts, valves, springs, and retainers if you decide to separate these parts.
I have most of those items, from a second set of heads for sale here -

http://bbs.legacycentral.org/viewtopic.php?t=35467
Top
pw422
Second Gear
Posts: 310
Joined: Wed Oct 06, 2004 1:48 am
Location: Boston/Quincy Ma

Post by pw422 »

are the heads direct bolt on, any modifications to fit on our ej22t block?
91 rio red ss 5mt
94 legacy wagon gt
95 impreza ej20 swapped
Top
manxaru
In Neutral
Posts: 11
Joined: Sun Mar 09, 2008 9:05 am

Post by manxaru »

pw422 wrote:are the heads direct bolt on, any modifications to fit on our ej22t block?
I know it's a direct bolt on for EJ20 & EJ25 blocks, but I don't have any experience with the EJ22. I'm sure someone else will chime, in or you can find out with a search.

FWIW - The block is probably fine I believe question will be the compatibility of the the intake manifold your using.
Top
PhyrraM
Fourth Gear
Posts: 1980
Joined: Thu Aug 11, 2005 4:34 pm
Location: Lake Elsinore, CA

Post by PhyrraM »

Yes, you would need to source a phase 1 DOHC intake manifold.
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
Top
pw422
Second Gear
Posts: 310
Joined: Wed Oct 06, 2004 1:48 am
Location: Boston/Quincy Ma

Post by pw422 »

is the phase 1 DOHC intake manifold hard to come by?
91 rio red ss 5mt
94 legacy wagon gt
95 impreza ej20 swapped
Top
Arctic Assassian
Third Gear
Posts: 935
Joined: Sat Apr 14, 2007 12:20 am
Location: Anchorage, Alaska

Post by Arctic Assassian »

its on every 2.5 N/A motor made from 1996-1999. Not all that hard to come by. Every legacy outback, GT and 2.5 impreza came with them.
Kickin' it old-school.
Top
pw422
Second Gear
Posts: 310
Joined: Wed Oct 06, 2004 1:48 am
Location: Boston/Quincy Ma

Post by pw422 »

so how much for the the heads?
91 rio red ss 5mt
94 legacy wagon gt
95 impreza ej20 swapped
Top
manxaru
In Neutral
Posts: 11
Joined: Sun Mar 09, 2008 9:05 am

Re: complete set JDM EJ20G heads w/ lots & lots of extra

Post by manxaru »

manxaru wrote:Complete set of JDM EJ20G "hydraulic rocker heads". I ran these on my car for 2000 miles and they ran great! I am told these heads are good for 7500 rpm, but I had my redline set at 7000.

Everyone knows the JDM 2.0 heads flow great and the only beef with the early "hydraulic rocker style" heads is that parts can be hard to get. Well, here is a complete set of heads with all the spare parts you will ever need.

In addition to complete set of heads (including springs, cam, retainers and covers, etc) I am including the following extra parts with this sale:

• metal timing gears (if you don't need them, we can delete to reduce shipping cost)
• set of 12 head bolts (if you don't need them, we can delete to reduce shipping cost)
• brand new set of intake, exhaust and breather gaskets
• 4 spare HLA's, tested & working (these are about $20 each, plus shipping from Europe or Japan)
• 4 spare HLA clips (cheap, but must be shipped from Europe or Japan)
• spare set of 2 exhaust & 2 intake valves
• spare set of 4 valve springs & retainers

I am asking $425, plus shipping for all of the parts shown above. I have a FEDEX ground account, so shipping is inexpensive.

I also have ignition coils, cams, valves, springs, HLA's, and valve covers from a second set of EJ20G hydraulic rocker heads for sale in another listing in this section.

Here are a few pics, more available upon request:

http://www.flickr.com/photos/65926977@N00/2392474103
http://www.flickr.com/photos/65926977@N00/2393302748
http://www.flickr.com/photos/6592697...in/photostream
http://www.flickr.com/photos/6592697...in/photostream
http://www.flickr.com/photos/6592697...in/photostream
http://www.flickr.com/photos/65926977@N00/2392480647
Top
Post Reply

Return to “Parts Shed”