So i think i Cracked my turbo, Videos

94SS_Canada · Post by **94SS_Canada** » Wed May 14, 2008 6:34 pm

WEll a responsible owner myself was cleaning my car today, its ran like a top ever since i got it, so i clean off the engine bay and finish with the car, i drive away and all i can feel is shaking i pull oer inspect my engine and see nothing out of the ordinary except for the fact the moter was shaking alot more than it should be, i thought maybe i got water onto a sensor so i left it overnight and the same tings the exhaust is shuddering but the moter seems to be running fine, the restriction seems to be in the exhaust, it not possible i clogged up a cat that quick or did somehow water get into the exhaust it would of evaporated anyways?

please help! Videos too!

http://www.youtube.com/watch?v=xHqSUKnWFko

http://www.youtube.com/watch?v=0-XaDHgReT8

http://www.youtube.com/watch?v=5xGNP87Ox-M

555BCTurbo · Post by **555BCTurbo** » Wed May 14, 2008 6:41 pm

Kinda sounds like it has a dead hole...but it is pretty hard to hear stuff on the videos...

94SS_Canada · Post by **94SS_Canada** » Wed May 14, 2008 6:46 pm

Whats a dead hole? What would it sound like and effect?

94SS_Canada · Post by **94SS_Canada** » Wed May 14, 2008 8:39 pm

Any other suggestions?

stipro · Post by **stipro** » Thu May 15, 2008 1:24 am

^^^Do you live in Calgary?? If thats the case, then maybe I can have a look at it. Let me know.

douglas vincent · Post by **douglas vincent** » Thu May 15, 2008 5:16 am

While its idling, start either pulling plug wires or unclipping injector clips. You will find the "dead" cylinder this way because all but one(two) will kill the engine, but the dead one will not make a difference.

Probably a plug wire, or bad plug.

stipro · Post by **stipro** » Thu May 15, 2008 5:17 am

^^^That was my thought. I have had a bad coil before the did the same thing.

94SS_Canada · Post by **94SS_Canada** » Thu May 15, 2008 6:44 am

stipro, im in High River 20mins south of calgary, also we pulled the turbo tody and it seemed fine i have a TD04 so i guess well do that swap and see where we are after the td04 swap.

94SS_Canada · Post by **94SS_Canada** » Thu May 15, 2008 6:53 am

stipro wrote:^^^That was my thought. I have had a bad coil before the did the same thing.

Can i pull a coil pack off a NA legacy?

94SS_Canada · Post by **94SS_Canada** » Thu May 15, 2008 7:11 am

Used a low pressure wash, and it was short but didnt cover any electrical connections, ive removed the turbo and its fine were swapping a TD04 in there right now, i have to modify some stuff and i have a huge question, Is this important to have or can my car be fine without it?

ALso if the coil pack is bad, can i grab one from a NA legacy sitting at pick n pull?

asc_up · Post by **asc_up** » Thu May 15, 2008 8:37 am

Lol you DEFINITELY need that. That's the charge pipe, and the little black thing is your bypass valve.

94SS_Canada · Post by **94SS_Canada** » Thu May 15, 2008 4:50 pm

Okay, thanks

stipro · Post by **stipro** » Fri May 16, 2008 2:06 am

94SS_Canada wrote: Also if the coil pack is bad, can i grab one from a NA legacy sitting at pick n pull?

Yes, that will work, maybe you'll even find it to be a diamond coil pack. They are a little better than the hitachi ones.

94SS_Canada · Post by **94SS_Canada** » Fri May 16, 2008 5:23 am

Cool, ill finish the TD04 swap tommorow, if its still like that ill go to pink n pull and pull the coil pack, thanks guys

smh0101 · Post by **smh0101** » Fri May 16, 2008 6:18 am

The td04... has a 90* outlet, so you need to intercool or rig up some charge pipe.

94SS_Canada · Post by **94SS_Canada** » Fri May 16, 2008 7:39 pm

The Td04 Dosent have a 90* outlet which i have already modified to fit, i now just need to modify a few air returns and the charge pipe

asc_up · Post by **asc_up** » Fri May 16, 2008 8:11 pm

I think you have things confused. You need to modify the charge pipe because of the 90* outlet.

The TD04 doesn't have a 90* inlet.

I think you meant what I'm saying, just had it worded backwards. Let us know if you need any help!

94SS_Canada · Post by **94SS_Canada** » Sat May 17, 2008 6:22 am

WEll im done the swap except for the charge pipe, im going to have to drill a hole into something to modify it that stock charge pipe just isnt going to work.

What have people used tto modify there charge pipe to fit, its to big now but what could i use?

asc_up · Post by **asc_up** » Sat May 17, 2008 6:24 am

A silicon hose with a 90* bend might work.

You should just throw on an intercooler right now. You've saved yourself a lot of work by putting on the TD04.

94SS_Canada · Post by **94SS_Canada** » Sat May 17, 2008 9:29 pm

I would but i canr find one and i need my car, it should be easy enough to modify down the line, what kinda boost controller should i get and what should i boost at?

Saskatoon Subaru · Post by **Saskatoon Subaru** » Sat May 17, 2008 10:08 pm

you may have even developed a miss, that what it sounds like to me. but hard to say through that video.

if you have a temp gauge, check each cylinder when its running, if one is colder then the rest you have a miss, which could be caused by a bad injector or bad spark plug and other stuff but I'd check the 1st two first.

94SS_Canada · Post by **94SS_Canada** » Sun May 18, 2008 4:00 am

How exactly do i test for a miss, using the temp guage method, guide me in the right direction and i can figure this out, a wrx intercooler will fit around my resoirvoir right?

Saskatoon Subaru · Post by **Saskatoon Subaru** » Sun May 18, 2008 5:57 am

94SS_Canada wrote:How exactly do i test for a miss, using the temp guage method, guide me in the right direction and i can figure this out, a wrx intercooler will fit around my resoirvoir right?

with these engines, it might be hard, but check the temp of each cylinder on the exterior of the engine. If one is way colder then the rest then that would be the one thats not firing.

94SS_Canada · Post by **94SS_Canada** » Sun May 18, 2008 7:10 am

IM really sorry and stupid, how do i do that?

94SS_Canada · Post by **94SS_Canada** » Sun May 18, 2008 7:16 am

On the Valve cover?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

So i think i Cracked my turbo, Videos

So i think i Cracked my turbo, Videos