1993 Legacy part out

jamal · Post by **jamal** » Thu Jul 10, 2008 4:35 am

So you may have heard I lost a rod bearing or three in my Legacy so it's getting parted out. I'm keeping some of the good stuff though.

The body is not in good shape and I wouldn't recommend purchasing any of the body panels. Especially the hood and trunk, unless you're having them painted. Most of the interior and trim is in good shape, the passenger headlight and turn signal are damaged, the grill is cracked, and the front left wheel bearing is questionable

Things that I don't have for sale
rear swaybar
struts/springs
front bumper
wheels
original brakes

things that are in very good condition:
front pass wheel bearing/hub/upright
ball joints
tie rods
steering rack
automatic OEM radiator
knock sensor
JECS maf

things that are in bad condition:
short block
transmission
exterior
pass. headlight and turn signal
grille

additional things I have/will have for sale
2.5 gt 20mm front swaybar (fits all non-turbos)
2.5 gt brakes
2.5 gt black and grey front seats
2.5 gt suspension (struts are not blown)
04 sti springs and tops/perches
Wiring harness adapter to use modern Subaru radios. Soldered and heat shrunk using a David Carter harness so the dimmer and power antenna will work.

I'll add more things when I think of them. The car is located in Fountain Valley, CA 92708

my paypal address is peterleclaire (at) gmail (dot) com

Fkyx · Post by **Fkyx** » Thu Jul 10, 2008 5:01 am

What color is the interior?

jamal · Post by **jamal** » Thu Jul 10, 2008 5:03 am

blue car, blue interior.

Fkyx · Post by **Fkyx** » Thu Jul 10, 2008 5:09 am

What do you want for the MAF shipped to 97601 (Oregon)?

jamal · Post by **jamal** » Thu Jul 10, 2008 5:15 am

$40. I got it used a month ago for that much.

oooh these seem to be a popular item in the parts shed. hows about $30 shipped

skid542 · Post by **skid542** » Thu Jul 10, 2008 6:03 am

So soon

.

Are you going to be keeping the rear camber bolts you used to adjust the STi struts?

jamal · Post by **jamal** » Thu Jul 10, 2008 6:10 am

skid542 wrote:So soon .

Are you going to be keeping the rear camber bolts you used to adjust the STi struts?

not sure. I'll have to see what numbers I get on the new car. I have a feeling I'll need them though.

93Subadan · Post by **93Subadan** » Thu Jul 10, 2008 7:01 am

How much for the driver's side turn signal shipped to 93505? I lost mine to a tumbleweed so I would need the turn signal, the cap that holds the bulb including the wiring going back to the white connector.

PM me, thanks!!

93Leg-c · Post by **93Leg-c** » Sat Jul 12, 2008 8:57 am

What are you asking for the 20mm front sway bar shipped?

ericem · Post by **ericem** » Sat Jul 12, 2008 3:57 pm

Jamal are the ball joints OEM and almost new? New OEM ones are $30 each.

Dusty B · Post by **Dusty B** » Sat Jul 12, 2008 4:04 pm

How much would you want for that knock sensor and wiring harness adapter shipped to 06234?

bvh56 · Post by **bvh56** » Sat Jul 12, 2008 8:49 pm

do you have the steel lines off the power steering rack available.

flystiguy · Post by **flystiguy** » Sat Jul 12, 2008 9:38 pm

Was it a 5-speed tranny? If so do you what kind? and do you have the clutch pedal set?

jamal · Post by **jamal** » Sat Jul 12, 2008 11:10 pm

ericem wrote:Jamal are the ball joints OEM and almost new? New OEM ones are $30 each.

yeah I put them in about a year and a half ago and they were new OEM parts. They should still be in great condition, I'll take them out tomorrow or monday when I pull my front suspension off and let you know.

flystiguy wrote:Was it a 5-speed tranny? If so do you what kind? and do you have the clutch pedal set?

no sorry it's an automatic.

ericem · Post by **ericem** » Sat Jul 12, 2008 11:40 pm

jamal wrote:
ericem wrote:Jamal are the ball joints OEM and almost new? New OEM ones are $30 each.
yeah I put them in about a year and a half ago and they were new OEM parts. They should still be in great condition, I'll take them out tomorrow or monday when I pull my front suspension off and let you know.

flystiguy wrote:Was it a 5-speed tranny? If so do you what kind? and do you have the clutch pedal set?
no sorry it's an automatic.

You know what I changed my mind. I prefer to go brand new, unless your willing to give a good price and make sure the seals are good!! I was also wondering if you ahve the nippon abs unit and if so i need the two relays from it.

ca18_sean · Post by **ca18_sean** » Mon Jul 14, 2008 9:12 pm

you have a driver side rear axle in good shape? also how much for the radio harness? price shipped to Oldsmar, FL 34677.

thanks,
-Sean

jamal · Post by **jamal** » Tue Jul 15, 2008 12:51 am

I'll take the axle out in the next few days to see if it's good. I think the harness might already be sold.

SubaruNation · Post by **SubaruNation** » Tue Jul 15, 2008 6:34 am

ya something is way wrong w/ my suspension.

i might need some parts from your SS when you come back to MT if so.

i'll let you know when i figure out what the problem is..

Post by **Legacy777** » Tue Jul 15, 2008 4:33 pm

Jamal,

I need like like 4 or 5 bolts from the front bumper that hold on the bumper skin. Would you have these?

jamal · Post by **jamal** » Tue Jul 15, 2008 8:27 pm

I do, but someone already has dibs on the bumper, and he may need them.

Post by **Legacy777** » Wed Jul 16, 2008 12:45 am

93Subadan · Post by **93Subadan** » Thu Jul 17, 2008 12:16 am

Got the corner light in the mail today, thanks for the fast shipping!

ca18_sean · Post by **ca18_sean** » Wed Sep 10, 2008 7:45 pm

did you ever check on that axle? and did the radio harness sell?

Bdub · Post by **Bdub** » Wed Sep 10, 2008 9:46 pm

Do you still have the 04 sti springs? And do you have all 4 perches?

Also the front wheel bearing and hub?

92wagon · Post by **92wagon** » Thu Sep 11, 2008 5:35 pm

what years does the 2.5 gt swaybar fit?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

1993 Legacy part out

1993 Legacy part out