I am compiling parts for my water-to-air intercooler setup and I would like to place the shurflo pump in the spot where the battery goes or where the ABS system is.
I can move the battery to the trunk but I don't want to. OR I can remove the ABS.
What all is needed to remove the ABS and have the brakes function like normal?
Deleting ABS ???
Moderators: Helpinators, Moderators
-
Boostedballs
- First Gear
- Posts: 204
- Joined: Mon Apr 25, 2005 12:38 am
Deleting ABS ???
Air-to-Water Intercooler, VF-39, 550 injectors, AEM FIC, stainless race header, 3" stainless exhaust, 75hp Nitrous, 150psi H2O injection, intake mods, stock: long block, 4EAT, ecm.
-
g20sleeperjdm
- First Gear
- Posts: 126
- Joined: Sat May 03, 2008 12:55 am
- Location: NH
- Contact:
Put the pump under the battery, like what I did, or put it under the abs pump.
Having the pump at a low spot is a good idea.
Having the pump at a low spot is a good idea.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
93forestpearl
- Fifth Gear
- Posts: 3043
- Joined: Tue Jan 25, 2005 9:14 pm
- Location: Twin Cities, MN
-
Boostedballs
- First Gear
- Posts: 204
- Joined: Mon Apr 25, 2005 12:38 am
ok, I decided to put the cooler and fan under the battery and the pump under the ABS unit. I had a bunch of aluminum sheet metal laying around so now it is going to good use. I'll get some photos posted when it's all done.
Air-to-Water Intercooler, VF-39, 550 injectors, AEM FIC, stainless race header, 3" stainless exhaust, 75hp Nitrous, 150psi H2O injection, intake mods, stock: long block, 4EAT, ecm.