Injectors

cj91legss · Post by **cj91legss** » Thu Dec 18, 2008 6:35 am

Where would i get 440s that will go into the USDM 22T fuel rails? or can the factory injectors be modified to amount?

Post by **Legacy777** » Thu Dec 18, 2008 6:42 pm

I'm not sure if you'll find any that fit specifically in the 22t fuel rails. However between the other first gen legacy fuel rails you could use some JDM 440's and match them to the correct fuel rail and be good.

Douglas Vincent has some good experience with swapping around injectors. He may be able to provide some additional insight.

BXSS · Post by **BXSS** » Thu Dec 18, 2008 6:47 pm

I thought folks used N/A legacy 2.2l side feed rails for getting JDM Grey 440's on a ej22t.

cj91legss · Post by **cj91legss** » Thu Dec 18, 2008 8:06 pm

well then looks like im goin to the junk yard soon

kleinkid · Post by **kleinkid** » Fri Dec 19, 2008 7:02 am

Grey top 440 side feed JDM injectors fit right into my '91 ej22t rails.

PhyrraM · Post by **PhyrraM** » Fri Dec 19, 2008 7:09 am

BXSS wrote:I thought folks used N/A legacy 2.2l side feed rails for getting JDM Grey 440's on a ej22t.

The N/A rails are used to install USDM STI yellow top 550cc injectors.

cj91legss · Post by **cj91legss** » Sat Dec 20, 2008 11:32 pm

Ok so now, if i were to upgrade my injectors... would sti injectors be too big for a wrx turbo or should i do something like a regulator?

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Injectors

Injectors