Auto to MT swap, which is the better donor for a 93 impreza?

[greg donovan]

i have recently acquired a 93 L AWD wagon with a ej18 and a 4EAT.

at some point i would like to make it a MT.

can i use everything from my old Legacy SS?

i am thinking that using an impreza pedal box would be better, as well as the less expensive trans/clutch combo would be better in the long run too.

which MT subarus have the 4.44 final drive?

[skatedees]

http://bbs.legacycentral.org/viewtopic.php?t=27119

[greg donovan]

http://bbs.legacycentral.org/viewtopic.php?t=27119

thanks. forgot about that one.

still wondering about best source for pedal boxes.

[Lurch]

Blackbart told me about six weeks ago he sells them with the master cylinder. I ran across a t-leg at the local u-pull-&-pay with the peddles still in it. I was going to pull them in case someone needed it but decided not to. If you strike out, I may being going back in a week for parts to fix my friends car.

[greg donovan]

so the legacy SS pedal set will work in an impreza?

i have a complete SS that i am either going to fix or use as a donor. i havent decided yet.

[Lurch]

Ooopps.... I guess I read the post too quickly. T-leg pedals will only work in a G11 WRX body. I think you would have to use Legacy777's clutch hole template to make them work. I'm guessing the pedals out of a NA 5sp would work if you are going with a pull clutch/tranny setup from am NA 5sp.

[Legacy777]

You have to match the pedals to the clutch type you're using. Primarily cable or hydraulic. For the most part (to my knowledge) the hydraulic pedals should work on both a pull & push style clutch setup. You just have to have the correct master & slave cylinder setup.

As for the template, I believe all the Imprezas "should" be cut for the hydraulic clutch master cylinder. If not, you can probably use my template.