Straight answer on intake hoses
Moderators: Helpinators, Moderators
Straight answer on intake hoses
Looking for size of hose from stock intake to wrx IC. Is it 2.75 or 3"? What about the 90* hose for the td04 is that one 3" or 2.75" ? Does anyone recall the size of the hose for the PCV that goes from the block to the f-pipe? I am searching but I feel confused and I don't want to order a bunch of parts that don't work!
1993 Subaru Legacy L AWD Wagon R.I.P
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
In my TMIC installation guide, I documented the different sizes of hoses I used...
'11 WRX Limited
'94 SS | 3" TBE, 07 TMIC, TD05H-16G, Revtronix Stage 2, Walbro -- Sold
'94 TW | R.I.P.
Ya its a good write up but I am using a TD04 so I need to know what size 90 to use I am reading 65mm or so. so is 2.75" the right size or do I use 3"? Also same goes for between the IC and TB.
1993 Subaru Legacy L AWD Wagon R.I.P
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
i used a 2" id silicone elbow for the td04 to y pipe.
td04 inlet is 2" id as well.
12.7mm is 1/2"
25.4 is 1"
50.8 is 2"
65mm is 2 1/2
76.2 is 3"
101.6 is 4"
td04 inlet is 2" id as well.
12.7mm is 1/2"
25.4 is 1"
50.8 is 2"
65mm is 2 1/2
76.2 is 3"
101.6 is 4"
93SS 04 wrx brakes/slotted w/ hawks--TD05 -- 06 I/C -- 20mm n/a fsb -- Stage 2 -- 550's -- Perrin DIV DP -- 2-3/4 Tit Exhaust -- K&N -- C/C -- A/C Delete -- Grounded -- GT Leather Interior -- WRX/STI Strut Setup -- 17" 225's -- 2 Kids Seats ;)
http://bbs.legacycentral.org/viewtopic. ... 04+install
You say its 2.5" while in this thread it says 2". Im so confused ah!!!! I want to order these pipes RIGHT NOW!!!!
You say its 2.5" while in this thread it says 2". Im so confused ah!!!! I want to order these pipes RIGHT NOW!!!!
1993 Subaru Legacy L AWD Wagon R.I.P
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
1994 Subaru Legacy SS R.I.P :(
2004 Nissan Titan LE 4X4
2007 Subaru Legacy GT :)
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Inside or outside diameter?
td04 inlet is 2" id as well.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
I went out to my garage and measured my td04L sitting there. OD diameter of tdo4 outlet is 2.0", same as inlet pipe going into wrx IC. Wrx IC outlet to throttle body is 2.75" OD.ericem wrote:Ya its a good write up but I am using a TD04 so I need to know what size 90 to use I am reading 65mm or so. so is 2.75" the right size or do I use 3"? Also same goes for between the IC and TB.
'94 TW