I just picked up a 93 Legacy turbo with a 5mt swap and it makes a whining noise and will not go into 5th gear. The previous owner said that the transmission is out of a 92 Legacy, but has a 06 WRX gearset in it. The whining sounds like it is coming from the rear, so I'm guessing it the rear diff, but does anyone have any idea what could be causing it to not want to go into 5th. It goes into every other gear just fine, but not 5th. I'm going to tear it down this week, but I wanted to get some ideas before I started.
Thanks for your help!
Transmission won't go into 5th gear?
Moderators: Helpinators, Moderators
-
- Second Gear
- Posts: 502
- Joined: Fri Sep 03, 2004 3:14 am
- Location: Armpit, USA
Hard to say, really... But I'd guess that last bearing on the mainshaft. That sucker caused me to lose 4th though, not 5th.
Was the FD ratio of the differential matched to the tranny when it was swapped?
Was the FD ratio of the differential matched to the tranny when it was swapped?
Cheers,
morgan
1992 Legacy BF
1946 Ford 1.5 Ton Truck (The Beast): http://community.webshots.com/user/fishbone79
morgan
1992 Legacy BF
1946 Ford 1.5 Ton Truck (The Beast): http://community.webshots.com/user/fishbone79
-
- Second Gear
- Posts: 502
- Joined: Fri Sep 03, 2004 3:14 am
- Location: Armpit, USA
Reverse is noisy because the gears are square cut. You sure it's not just a bent or misaligned fork? That fork would slide R into the correct position while the 5th gear side could be hosed...
Cheers,
morgan
1992 Legacy BF
1946 Ford 1.5 Ton Truck (The Beast): http://community.webshots.com/user/fishbone79
morgan
1992 Legacy BF
1946 Ford 1.5 Ton Truck (The Beast): http://community.webshots.com/user/fishbone79