20MM HUB CENTRIC SPACER ADAPTER

yazmo · Post by **yazmo** » Thu Sep 24, 2009 9:30 pm

anyone have give a try to those kind of hub spacer?

http://cgi.ebay.ca/ws/eBayISAPI.dll?Vie ... gory=42614

i would like some feedback!

n2x4 · Post by **n2x4** » Fri Sep 25, 2009 4:48 pm

If you're looking to buy a wheel spacer, hubcentric is the way to go so that the wheel mounts properly.

20mm is a pretty aggressive spacer and for a daily driver will prove to be harsh on your wheel bearings.

Dynamic Entry · Post by **Dynamic Entry** » Fri Sep 25, 2009 5:17 pm

I have hubcentric 25mm wheel spacers

Mine are built by Eibach and they are a different design. Mine don't require longer studs. The spacer goes onto the hub and is bolted down with the included low profile lugnuts. The spacer itself then has lug bolts that your wheel is mounted on and you use your original lugnuts to secure the wheel.

Sorry yazmo, I don't have a picture at the moment to help explain.

One thing to be SURE of is you need to find out exactly what kind of aluminum is used. It is not enough that they say 'it is very strong'. They will always say that, and I doubt they have a warranty that will cover your car and your health if something happens.

I put my spacers on back in May, but with 17" wheels they just didn't fit so I took them off.

I plan to use them when I put my winter wheels on.

yazmo · Post by **yazmo** » Fri Sep 25, 2009 8:19 pm

thx buddy ill ask them what knd of aluminium they use
do you feel some handling improvement with these?

if sometime you have time to get a picture of them let me know

Dynamic Entry · Post by **Dynamic Entry** » Wed Oct 14, 2009 8:32 am

they are hubcentric

they came with the studs pressed in

they came with nuts that go on the hub studs

so you use your lugnuts to go on the spacer studs

yazmo wrote:do you feel some handling improvement with these?

heh, today was the first time I used them, but... it was with different wheels and tires and in snow

so I didn't notice a difference based on the spacers

i just like wheels to fill out the wells.....

yazmo · Post by **yazmo** » Wed Oct 14, 2009 11:03 am

nice im gonna get mine. any picture of the car with hub on it?

asc_up · Post by **asc_up** » Wed Oct 14, 2009 8:22 pm

Dynamic Entry wrote:
heh, today was the first time I used them, but... it was with different wheels and tires and in snow

so I didn't notice a difference based on the spacers

i just like wheels to fill out the wells.....

PICTURES!

Dynamic Entry · Post by **Dynamic Entry** » Thu Oct 15, 2009 7:08 am

I had already rolled my fenders to get my 17x7s in there, but the rear passenger fender needed a tad more.... other three corners were fine

also remember that I am about an inch and a half lower than stock

asc_up · Post by **asc_up** » Thu Oct 15, 2009 8:31 am

Sweeeeeet. I'm lowered about the same amount with 17x8's and 235/40's. I think this is just what I need to completely fill out the wheel wells.

Post by **Legacy777** » Thu Oct 15, 2009 4:47 pm

Why do you have a baseball bat leaning against the car.......

asc_up · Post by **asc_up** » Thu Oct 15, 2009 4:58 pm

I was just about to ask that as well. Hooligans...

kimokalihi · Post by **kimokalihi** » Thu Oct 15, 2009 5:14 pm

I was wondering the same thing. A legacy...snow...intersection....basebal bat? WTF!

Then it made me think of this video which is pretty funny. There's a baseball bat at the end of the video.

http://www.youtube.com/watch?v=qh2Jed20wLk

asc_up · Post by **asc_up** » Thu Oct 15, 2009 5:34 pm

DUDE! BEST VIDEO EVER!

Mattheww044 · Post by **Mattheww044** » Thu Oct 15, 2009 7:29 pm

o ya ive seen that video. It so badass they had it coming dumbasses can't just leave people alone

Dynamic Entry · Post by **Dynamic Entry** » Fri Oct 16, 2009 3:21 am

you never know when you'll have to pull over and roll your fenders

kimokalihi · Post by **kimokalihi** » Fri Oct 16, 2009 9:17 am

You can roll fenders with a baseball bat?

asc_up · Post by **asc_up** » Fri Oct 16, 2009 11:06 am

Yup, that's how I did mine.

yazmo · Post by **yazmo** » Fri Oct 16, 2009 7:07 pm

are you serious about rolling a bat on the fender that crazy job, i would like to see how you did it

kimokalihi · Post by **kimokalihi** » Fri Oct 16, 2009 7:10 pm

I too would like to see a demo on the baseball bat method.

brand · Post by **brand** » Fri Oct 16, 2009 7:24 pm

http://forums.nasioc.com/forums/showthr ... ?t=1777067

My opinion... take it to a shop that will do it, or rent a real roller and do it yourself.

asc_up · Post by **asc_up** » Fri Oct 16, 2009 7:31 pm

http://www.youtube.com/watch?v=DDTK9IjKIYU

Skip to 5:00. That's how I did mine and it worked perfectly.

yazmo · Post by **yazmo** » Fri Oct 16, 2009 7:33 pm

hey guy this is not really bend right its just the inside of the fender, not even a bend

not like this one

asc_up · Post by **asc_up** » Fri Oct 16, 2009 8:25 pm

No, it is. He did what's called 'flaring' when he rolled the fenders.

yazmo · Post by **yazmo** » Fri Oct 16, 2009 8:40 pm

oh that how it called great thx ill look around for more info

Dynamic Entry · Post by **Dynamic Entry** » Tue Oct 20, 2009 6:55 am

*update*

when I added a passenger there was rubbing on all four corners during any loading of the suspension

I will see if the body can be adjusted to accommodate, but I may need to take these off.

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

20MM HUB CENTRIC SPACER ADAPTER

20MM HUB CENTRIC SPACER ADAPTER