Jdm 4 piston brakes

sleepinsuby · Post by **sleepinsuby** » Thu Aug 06, 2009 9:50 pm

I have a 94 ss that I purchased recently that came with 4 piston front calipers.. they are jdm. I have spent the last two weeks searching the net, and buying and takin back usdm brake pads trying to find ones that fit. Anyway Im tryin to figure out what jdm cars came with 4 piston calipers that will bolt on to our cars. I think it is the jdm legacy or the jdm Impreza. Or can anyone positively identify the calipers I've got? I've tried pads from 06 Wrx and 06 sti pads. They're similar to the sti pads but for a smaller rotor. I can take a picture if you need. Any help would be greatly appreciated. thanks

PhyrraM · Post by **PhyrraM** » Thu Aug 06, 2009 10:55 pm

Have you tried '90-'95 300Z twin turbo pads? I seem to recall a few post that indicate they may be the same as the JDM 4pots.

Failing that maybe you can try trading them to a "JDM whore fanboi" for a set of '06-'07 WRX 4 pots?

I'm sure some of the established Subaru shops can source the proper pads also. I would search/ask on rs25 or Nasioc.

93forestpearl · Post by **93forestpearl** » Fri Aug 07, 2009 12:14 am

They should be the same as '06-'07 WRX calipers. How did they not fit? Pics would help.

Post by **Legacy777** » Fri Aug 07, 2009 6:23 pm

93forestpearl wrote:They should be the same as '06-'07 WRX calipers. How did they not fit? Pics would help.

Ditto.

Airgne · Post by **Airgne** » Fri Aug 07, 2009 7:55 pm

the link below is were i got my brakes from. i have pdm 4 pots and usdm 2 pots.

4 pot pad part number for EBC red stuff is DP31200c
2pot pad part number for EBC red stuff is
dp2826c

it will say for a nissan 300zx but they are the same caliper. made by the same company.

front rotor part number for EBC is
GD972
rear rotor part number for EBC is
GD7409

http://www.placeforbrakes.com/index.php

hope this helps. i jsut did this last week.

jamal · Post by **jamal** » Sat Aug 08, 2009 9:09 am

the D-plate numbers are also in the brake sticky.

93forestpearl · Post by **93forestpearl** » Sun Aug 09, 2009 6:40 am

Pad-wise they might be the same, but they are not the same caliper. The main caliper body is the same, but the "ears" for mounting are not in the same spot. There is about a 1/4" difference.

Airgne · Post by **Airgne** » Sun Aug 09, 2009 7:18 am

93forestpearl wrote:Pad-wise they might be the same, but they are not the same caliper. The main caliper body is the same, but the "ears" for mounting are not in the same spot. There is about a 1/4" difference.

sorry i didnt say everything about the damn calipers, but he has the FHI calipers so i didnt think it would have to be said.

they are the same cailper made by the same company. you have to get adapters because the nissan rotors are 5mm bigger than subaru rotors, so that means the ears are a pub hair longer.

jdmleggy97 · Post by **jdmleggy97** » Wed Dec 23, 2009 3:45 am

Pads for toyota landcrusier fit and are interchange options for the 4pots. I belive early 90's ,92-94 was the years i think i work in a part store and they were very very close with subtle diffrences.

dscoobydoo · Post by **dscoobydoo** » Thu Dec 24, 2009 4:44 am

My 4pot/2 pot brakes for the SS are JDM calipers.

I just used 06 WRX pads and they fit fine.

subytech · Post by **subytech** » Mon Dec 28, 2009 3:19 am

Tire rack sells pads for "non US Subaru 4 pot calipers" for the 2.5rs.
Or 06-07 WRX TR pads will work
http://www.tirerack.com/brakes/results. ... toModClar=

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

Jdm 4 piston brakes

Jdm 4 piston brakes