Whiteline Endlinks

Struts, spring, anti-rollbars, braces and the like.

Moderators: Helpinators, Moderators

Post Reply
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Whiteline Endlinks

Post by Legacy777 »

Just thought I'd put this pictures up. I had the WL steel endlinks on before for some time now, however I swapped them over to the Impreza to get rid of a clunking I had, and was going to replace the ones on the Legacy.

I found that the new ones were kind of pain to fit in the brackets. I had to trim one of the front links a little to fit into the lower A-arm bracket.

http://main.experiencetherave.com/subar ... eendlinks/
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
jdmellor28
First Gear
Posts: 130
Joined: Tue Dec 23, 2008 1:38 am
Location: dover , ohio
Contact:

Post by jdmellor28 »

hey i have been looking at these for a little while ... these are for the 2002 wrx right ?? and they fit our legacys ? with little to no mods to the sway bar or the new endlinks ?

i think im just gona do the front for now .. they are the straight ones right kinda looks like an 8 .

i just wana make sure i order the right parts ! thanks !
jdm jeffrey
photos : http://s135.photobucket.com/albums/q140/jeffreydm28/legacy/
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

So you had clunking with the figure-8 style links but not the C-style ones you just put on?

What brand are those control arms? How much were they? You can adjust camber with those right?
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

jdmellor28 wrote:hey i have been looking at these for a little while ... these are for the 2002 wrx right ?? and they fit our legacys ? with little to no mods to the sway bar or the new endlinks ?

i think im just gona do the front for now .. they are the straight ones right kinda looks like an 8 .

i just wana make sure i order the right parts ! thanks !
The fronts are part # KLC20A
The rears are part # KLC19
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

kimokalihi wrote:So you had clunking with the figure-8 style links but not the C-style ones you just put on?

What brand are those control arms? How much were they? You can adjust camber with those right?
The clunking was occuring on the Impreza, not the Legacy. The Impreza had stock endlinks & swaybars. I just replaced the stock endlinks ones with the WL's.

They are Whiteline adjustable lateral links. Scroll down a little and you'll find out where I bought them and cost.
http://www.surrealmirage.com/subaru/swa ... suspension

I think price has gone up since I bought them though, and I don't know if ISR is around any more.

As for adjustments....you can adjust anything anywhere on these. They provide near infinite rear alignment adjustments.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
kimokalihi
Fifth Gear
Posts: 8360
Joined: Mon Nov 06, 2006 3:41 am
Location: Tenino, WA

Post by kimokalihi »

I will definately be getting those one day. lol
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Post Reply