more hose questions!!

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
nicv217
In Neutral
Posts: 35
Joined: Mon Nov 17, 2008 1:49 am
Location: Milford ct USA

more hose questions!!

Post by nicv217 »

can someone tell me where hose a,b and c goes. also for the radatior reservor what does the bottom line go to then the other lines on the canister! any info would be great i have trouble with the manual and want to do this one shot...also for the emmissions line that runs from valve cover to valve cover underneath the intake can you put the intake on after that.or is there a certaint order?

Image

Image

Image
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Post by Legacy777 »

A goes to the coolant resevoir

B goes to the IAC valve

C also goes to the coolant resevoir
also for the radatior reservor what does the bottom line go to then the other lines on the canister!
Not sure exactly what you mean here. Can you please try and ask again.

That plastic emissions line will be zip tied in with the fuel lines and wiring harness on the intake manifold. You'll put it together at one time. The hardest part is getting that center fitting hooked up.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply