Nice little write-up over on scoobymods.com
http://www.scoobymods.com/modify-05-sti ... 12527.html
How to modify 05+ STI front struts to fit non-STI cars
Moderators: Helpinators, Moderators
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
How to modify 05+ STI front struts to fit non-STI cars
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Re: How to modify 05+ STI front struts to fit non-STI cars
Perfect, was just gonna buy a 05 STI set-up and this is exactly what I wanted to know, Thanks
-
- Fifth Gear
- Posts: 8360
- Joined: Mon Nov 06, 2006 3:41 am
- Location: Tenino, WA
Re: How to modify 05+ STI front struts to fit non-STI cars
Cool. Forgot I made this thread. This one, not the actual write-up lol.
98 Metro Hatch Daily Driver :)
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
91 SS EJ20G Engine/Tranny/Diff Swap Build Thread Here
"Your testes are close to your bottom but you still play with them all the time." Jeremy Clarkson
Re: How to modify 05+ STI front struts to fit non-STI cars
Alright , well I after reading numerous threads I am still somewhat confused in using this set-up on my 92 SS
So basically where Im at is I know that the fronts should just bolt right in up top and after modifying the lower strut mount that it will be GTG.
As for the rears, I would like to know if I can just file out the top holes and use the whole 05 STI unit without having to switch to the 90-91 top hats or camber plates
So what are my best options, Do I just avoid buying this set-up completely and keep searching for a better set-up ?
Does this set-up raise or lower the car ? I have read 2 different outcomes. I plan on running 16x6.5" W/ 205/55's and would prefer to lower it a bit and if I have to get some lower profile tires, So be it.
Any help would be appreciated, Thanks.
Reid.
So basically where Im at is I know that the fronts should just bolt right in up top and after modifying the lower strut mount that it will be GTG.
As for the rears, I would like to know if I can just file out the top holes and use the whole 05 STI unit without having to switch to the 90-91 top hats or camber plates
So what are my best options, Do I just avoid buying this set-up completely and keep searching for a better set-up ?
Does this set-up raise or lower the car ? I have read 2 different outcomes. I plan on running 16x6.5" W/ 205/55's and would prefer to lower it a bit and if I have to get some lower profile tires, So be it.
Any help would be appreciated, Thanks.
Reid.
Re: How to modify 05+ STI front struts to fit non-STI cars
^ Anybody Know ^
Re: How to modify 05+ STI front struts to fit non-STI cars
I am running 04 STI struts with 91 rear Legacy strut mounts and 07 STI springs. My ride height is very slightly higher then stock. I believe you can drill out the holes and use the STI rear strut tops, but I haven't done it myself.
92 Legacy Sport
00 Impreza 2.5RS
00 Impreza 2.5RS
Re: How to modify 05+ STI front struts to fit non-STI cars
Alright, good to know. Might have to shed some spring then
So why did you go with the 07 springs instead of the 04's then, Stiffer rates ?
So why did you go with the 07 springs instead of the 04's then, Stiffer rates ?