Pedal Assembly Removal

[SubyFusion]

Does anyone know of a write-up on how to remove the pedal assembly?

[SubyFusion]

do you have to take the dash out? or just remove the steering column?

[Binford]

You don't remove anything but the pedal assembly aside from the lower dash panel. From memory there are four bolts that go through the firewall to the brake booster. Un-bolt those and pull the booster/master cylinder away from the firewall under the hood. Another bolt goes straight up above the gas pedal. Un-plug the brake switch and the clutch switch (unless you have an auto ) and pull!

[SubyFusion]

Its a Hydraulic pedal assembly so its all one piece, and I cant get it around the steering column

[Binford]

Oh yeah, I've been playing with these NA's so much latelely, I forgot about that possibility! I have removed the pedal assembly out of my '91 SS, and I do remember having to pull the steering column out, sorry. I've never pulled a dash yet, so I know you don't have to resort to that to get it out.

[BSOD2600]

Undo the bolts on the steering column so it'll drop down a little bit. Then the pedal box should have enough room to slide over it... so I seem to recall from removing one last year.

[SubyFusion]

Thanks droped the steering column and it wiggled right out!