High Output Coil

crawlerdan · Post by **crawlerdan** » Sun Jan 30, 2011 11:27 pm

i purchased two dodge neon coils, installed one on my 91, and built a second one to sell

you get a high output coil, plug and play harness (you have to do no wiring)
the 4 plug boots you will need, and the longer hardware you will need.

remove your coil, and boots, plug these in, and enjoy 3-5 more horsepower, and 1-2 mpg install time is about 15 mins
these claims are from other subaru owners that have done this swap, not me

will fit early legacyys, impreza, with 3 prong coil plugs

80.00 shipped anywhere in lower 48

Justins91ss · Post by **Justins91ss** » Mon Jan 31, 2011 3:14 am

Location? Thx

crawlerdan · Post by **crawlerdan** » Mon Jan 31, 2011 3:18 am

portland oregon

92legacyL · Post by **92legacyL** » Mon Jan 31, 2011 3:27 am

will u have more

crawlerdan · Post by **crawlerdan** » Mon Jan 31, 2011 3:50 am

i can make more yes, but i have one now

Justins91ss · Post by **Justins91ss** » Mon Jan 31, 2011 4:50 am

Oh ok next time i get down there for pics or nike stuff ill give ya a message.. Thanks

darkcrave · Post by **darkcrave** » Tue Feb 01, 2011 1:38 am

Do you know the specs vs stock?

crawlerdan · Post by **crawlerdan** » Tue Feb 01, 2011 1:44 am

oh geeze, there are exact numbers somewhere, google it, i think ours are 26k volts and this is 34k volts

dkopp · Post by **dkopp** » Tue Feb 01, 2011 5:48 am

mid-way down first page there's information on the diamond coil approaching ~24k volts on the secondary. no information on hitachi.

http://bbs.legacycentral.org/viewtopic.php?f=5&t=224

only thing i found for mopar said 30k volts on the secondary and that was an SRT-4 coil pack for the turbo'd neon. the msd packs hit 36k volts with the cheapest i found online at $69.

anyways, an inexpensive upgrade using newer electronics. bump for a board member offering a complete kit for his fellow enthusiasts.

lindstromjd · Post by **lindstromjd** » Thu Feb 03, 2011 8:20 pm

Still have it? Take paypal?

crawlerdan · Post by **crawlerdan** » Fri Feb 04, 2011 3:21 pm

yes i do, pay pal email is
crawlerdan@hotmail.com

lindstromjd · Post by **lindstromjd** » Fri Feb 04, 2011 7:35 pm

Payment sent.

mx4life · Post by **mx4life** » Tue Feb 08, 2011 2:42 am

let me know when you have another one. I would like to have one

crawlerdan · Post by **crawlerdan** » Tue Feb 08, 2011 3:04 am

if you would like to prepay, i will obtain the materials.i will be out of town next week though

mx4life · Post by **mx4life** » Tue Feb 08, 2011 4:22 am

Ok, I have a version 1 swap in my ss, instead of the jdm coil packs i am running my stock coil. The coil you have will work right? Will send payment friday when I get paid then. Hope fully a better spark will help my raw fuel smell and clean up the exhaust a bit.

crawlerdan · Post by **crawlerdan** » Tue Feb 08, 2011 4:33 am

i looked at pics of your car, it looks like it will work. you must have a 3 wire coil plug to use this set up

lindstromjd · Post by **lindstromjd** » Thu Feb 10, 2011 2:56 pm

Just got mine in the mail yesterday. Took me about an hour to install because I ended up fiddling with the coil connections on the wires. Have to go to the parts store to get a new kit to build my own spark plug wires so I can use the 90 degree connectors (the stock straight connectors don't work, and can't be modified. I tried. Trust me). Otherwise, everything was really simple. Just had to install the coil so I'm using the top 2 bolt holes, and rotated 180 so it's technically "upside-down" so the wiring will work. Doesn't effect the engine's ability to run though. Had I been ready for all this... I could probably do it all over again in about 20 minutes. Will post back later with performance info.

crawlerdan · Post by **crawlerdan** » Fri Feb 11, 2011 4:22 am

thanks, i noticed about .5 mpg in the last tank with mine

mx4life · Post by **mx4life** » Sat Feb 19, 2011 2:59 am

Payment sent!

crawlerdan · Post by **crawlerdan** » Sat Feb 19, 2011 3:21 am

it will be shipped monday- thanks

mx4life · Post by **mx4life** » Sat Feb 19, 2011 3:59 am

Sorry it took so long, I work at a ski resort and we got 60 inches in 3 days so i was busy for a week. Cant wait though! any modification that I need to do or is it PnP?

lindstromjd · Post by **lindstromjd** » Sat Feb 19, 2011 4:02 am

mx4life wrote:Sorry it took so long, I work at a ski resort and we got 60 inches in 3 days so i was busy for a week. Cant wait though! any modification that I need to do or is it PnP?

Just look at what I had to do to mine to get it to work and you should have no problems. My post explaining it is just a couple above this one.

crawlerdan · Post by **crawlerdan** » Sat Feb 19, 2011 4:04 am

you need to swap spark plug wire ends, but i will include them. other then that-PNP

mx4life · Post by **mx4life** » Sat Feb 19, 2011 8:47 pm

thanks. looking forward to having this. its off an srt-4? i have some others here interested in them too.

crawlerdan · Post by **crawlerdan** » Sat Feb 19, 2011 9:10 pm

no, its a standard neon/concorde/caravan coil. but it produced like 40 percent more voltage, somewhere around that. makes for hotter spark, more complete burn. if you reset your ECU, you may realize more mpgs as teh ecu will relearn at more efficiant peramiters....or some junk

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

High Output Coil

High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil

Re: High Output Coil