CEL / Injector #3

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
ejscoob
In Neutral
Posts: 4
Joined: Sun Feb 20, 2011 9:05 pm

CEL / Injector #3

Post by ejscoob »

Started car other day, "manual" light flashes 16 times then next day CEL stays on
it's still running but hope I didn't mess anything up
Code seems to be for #3 injector... where would this be looking at the engine from the front?
thanks
1994 Legacy L "Postal" Wagon w/ an 08/'97 EJ22 NA swap
Legacy777
Site Admin
Site Admin
Posts: 27931
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: CEL / Injector #3

Post by Legacy777 »

Welcome to the BBS. I'd check the TCU as well, because the TCU should not flash if you have an injector problem. Try clearing the codes afterwards and see if the light comes back on. Do you get the same codes in the active mode check with the green connectors?
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
subydaddy
First Gear
Posts: 168
Joined: Sat May 03, 2008 6:24 pm
Location: Alaska

Re: CEL / Injector #3

Post by subydaddy »

Standing on front of the car looking at the engine the cylinder's are numbered as such:

Tailights
3 - 4
1 - 2
Headlights


Firing order is 1-3-2-4
ejscoob
In Neutral
Posts: 4
Joined: Sun Feb 20, 2011 9:05 pm

Re: CEL / Injector #3

Post by ejscoob »

Strange, the next day I go to take it to the import shop and... no CEL and no flashing "Manual" light
Go figure.
*closed*
1994 Legacy L "Postal" Wagon w/ an 08/'97 EJ22 NA swap
Post Reply