NA parts on turbo legacy work??

Headlights to tailights and everything in between.

Moderators: Helpinators, Moderators

Post Reply
skygaze666
In Neutral
Posts: 14
Joined: Thu Feb 02, 2012 1:51 pm
Location: capital hill

NA parts on turbo legacy work??

Post by skygaze666 »

okay i still cant find a answer to whether i can use non turbo TPS sensor and under intake wire harness on my turbo legacy please please help i need to know bad and i cant find a answer!!!
PhyrraM
Fourth Gear
Posts: 1980
Joined: Thu Aug 11, 2005 4:34 pm
Location: Lake Elsinore, CA

Re: NA parts on turbo legacy work??

Post by PhyrraM »

The TPS should be the same if both a first gen cars.

The harness is different, but should be able to be used by repinning a few wires and reusing the grounds from the turbo harness. Or use the non-turbo harness to repair a turbo one by sourcing indevidul wires.
'93 Winestone SS Auto, '91 Pearl White SS.
'93 Pure White SS EJ20G slanty intercooled, SIDESWIPED! In stasis.
'94 FWD and '95 AWD Laguna Blue SVXs.
2017 Pure Red BRZ Limited w/Performance pack
skygaze666
In Neutral
Posts: 14
Joined: Thu Feb 02, 2012 1:51 pm
Location: capital hill

Re: NA parts on turbo legacy work??

Post by skygaze666 »

thanks alot man fried my tps sensor and my harness is cracked up and has exposed wires but thanks again
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: NA parts on turbo legacy work??

Post by Legacy777 »

Answered your original post about the harness.

The TPS is the same.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply