Gaskets, bearings and seals kits for 22t rebuild question
Moderators: Helpinators, Moderators
Gaskets, bearings and seals kits for 22t rebuild question
Whats a good set of gaskets, bearings and seals for an ej22t? IM rebuilding it and can't find all that many opinions of what's available. Also I was told metal head gaskets are good idea. Can anyone recommend one? Is Copper or Steel better?
'94 Winestone Turbo Wagon 4.111rLSD JDM 5speed/Rebuilt motor/ A'pexi power intake
Re: Gaskets, bearings and seals kits for 22t rebuild questio
Having done a lot of reading, I chose the OEM overhaul gasket set via 1stsubaru parts.. Something like $230? Kit does not come with rings/bearings. For bearings I just used ACL Main & connecting rod race bearings-- Sounded like they have been used without issue in the past.
Subaru-less
Re: Gaskets, bearings and seals kits for 22t rebuild questio
So the main and rod bearings didn't come with the kit?
'94 Winestone Turbo Wagon 4.111rLSD JDM 5speed/Rebuilt motor/ A'pexi power intake
Re: Gaskets, bearings and seals kits for 22t rebuild questio
Oh sorry skipped over that piece of info on my phone. I see it now.
'94 Winestone Turbo Wagon 4.111rLSD JDM 5speed/Rebuilt motor/ A'pexi power intake
Re: Gaskets, bearings and seals kits for 22t rebuild questio
I'll second the OEM gasket kit. it comes with all the little grommets and pieces you need.
Pics of what comes with the kit is on the bottom of the page.
http://www.main.experiencetherave.com/s ... age_02.htm
Pics of what comes with the kit is on the bottom of the page.
http://www.main.experiencetherave.com/s ... age_02.htm
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Gaskets, bearings and seals kits for 22t rebuild questio
http://www.rpmmachine.com/shop/index.ph ... ail&p=5385
Is this a good kit? Comes with main and rod bearings also and costs about the same as just the OEM gaskets
Is this a good kit? Comes with main and rod bearings also and costs about the same as just the OEM gaskets
'94 Winestone Turbo Wagon 4.111rLSD JDM 5speed/Rebuilt motor/ A'pexi power intake
Re: Gaskets, bearings and seals kits for 22t rebuild questio
No idea.....I'd contact them and see if you can find out who makes the gaskets and bearings.
Honestly, I wouldn't put cheap bearings and head gaskets in my engine.
Honestly, I wouldn't put cheap bearings and head gaskets in my engine.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
Re: Gaskets, bearings and seals kits for 22t rebuild questio
Where did you happen to buy your ACL bearings? I came across them on slowboy racing, but I've heard they're somewhat unreliable to deal with. I just bought the OEM gasket set. Just need the bearings and I will be set.
'94 Winestone Turbo Wagon 4.111rLSD JDM 5speed/Rebuilt motor/ A'pexi power intake
Re: Gaskets, bearings and seals kits for 22t rebuild questio
http://www.google.com/url?sa=t&rct=j&q= ... l8PsEa7WZQ
BAM! this is the place to get your bearings from. last i checked (3 Months ago) they had 18 sets of both.
BAM! this is the place to get your bearings from. last i checked (3 Months ago) they had 18 sets of both.
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: Gaskets, bearings and seals kits for 22t rebuild questio
5M8297H (for thrust in #3 position) mains
http://www.nolimitmotorsport.com/prod/AEB-5M8297H
4B8296H (suits 52 mm journal size)
http://www.nolimitmotorsport.com/prod/AEB-4B8296H
http://www.nolimitmotorsport.com/prod/AEB-5M8297H
4B8296H (suits 52 mm journal size)
http://www.nolimitmotorsport.com/prod/AEB-4B8296H
90 legacy Wagon LS Special, JDM closed deck 20g, custom 25d heads f/ metic motors, APS GC FMIC, 740cc, VF34, 4.11 F/D, Turboxs RFL blow off valve, now with piggyback.
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
94 Legacy SS R.I.P (parts car now for 90)
97 Legacy Outback (sold)
Re: Gaskets, bearings and seals kits for 22t rebuild questio
I'd have to look and see where I bought them from. I bought the race versions which have a slightly stiffer backing I believe. This is my first experience with them, so we'll see how they work.
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm