-I have some extra parts hanging around I need to get rid of.
-I have a MRT (Aussie Co.) axle-back muffler which is not being used anymore. It was modified to fit my 92 Legacy SS. Here is a video of what it sounds like:
http://www.youtube.com/watch?v=cPAsS8GrQWM
-Here are some today pics of it:
-Here is the link to the muffler / exhaust system new:
http://www.mrtperformance.com.au/produc ... q%3D487627
-I also have a 3" flange, resonator and flex joint if needed:
-I'm letting this go cause my first exhaust was deafening, this exhaust setup was to proper / quiet for my taste, so now I am happy with my new setup.
-I also have a custom single 12" ported fiberglass and wood sub box. Nothing wrong with it, my sub died on me so I just pulled everything out.
-The amp I may let go if the price is right.
-The link for the specs on it:
http://www.crutchfield.com/S-kcKvQSUqbM ... 9103D.html
-As far as prices, its really hard to determine what these items are worth. The amp, I have had for 3-4+ years, the box maybe a year, and the muffler only a few months, purchased used from boostcreep. $100-muffler, $50-sub box, $100-amp. Everything is obo and I'm willing to negotiate. I'm located in north Denver, call or text: 7 two 0 - 4 zero 9 - 2 three 4 five. Thanks.
-Joe
FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
Moderators: Helpinators2, Moderators
Forum rules
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
Please see the NEW Parts Shed Rules before posting: http://www.bbs.legacycentral.org/viewto ... 15&t=55814
Sales of parts and parting cars only. Complete or parted car posts should be made in Car Lot: http://www.bbs.legacycentral.org/viewforum.php?f=32
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
Last edited by CAV3MAN227 on Mon Jun 11, 2012 11:29 pm, edited 1 time in total.
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
-I also have a 2.5RS hood scoop I was going to use on my Tleg but don't think I want to cut my hood:
-$40 obo.
-Joe
-$40 obo.
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
Would the flex pipe and axle back make for a direct bolt on onto my 93? If so, how much shipped to 84095?
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
-No but you could make it to be. The axle back will go up with the stock hangers, but the pipe would have to be welded or I have a 3" flange, that I'll throw in for free, that could be welded to the mufflers inlet pipe, then connected that way. Either way, there would have to be some welding done.
-Shipping, I'm not sure, I've never priced out anything to ship off to another state. If there's a website or something, I'm all ears and would glad to get that done for you.
-Joe
-Shipping, I'm not sure, I've never priced out anything to ship off to another state. If there's a website or something, I'm all ears and would glad to get that done for you.
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
You can use ups.com or the usps website depending on the size and weight that the box would be. I shipped a downpipe to NC and it was pricey only because it was so long. Let me know what you find out. I will have to look into someone to weld it up for me.
Brian
Brian
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
-Ok here's what I got:
-Joe
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
-Monday bump-a-roo!
-Joe
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
i'll take the exhaust stuff. Pm'd!
-
- Third Gear
- Posts: 897
- Joined: Fri Dec 25, 2009 8:21 am
- Location: Arvada, CO
- Contact:
Re: FS/FT: MRT Axle Back, 12" Sub Box and Kenwood Amp
-Still have the hood scoop and sub box! offers!
-Joe
-Joe
-I'd rather loose by a mile because I built my own car, than win by an inch cause someone else built it for me. Your car, is your story, so don't let someone else write the book. ~Moog