gray top injector question

Heads, valves, pistons, rods, crankshaft, etc...

Moderators: Helpinators, Moderators

Post Reply
2.2TLegacy
First Gear
Posts: 153
Joined: Tue Feb 28, 2012 6:36 pm
Location: Seattle, WA

gray top injector question

Post by 2.2TLegacy »

So i think i have done something stupid. On the forester 440cc gray top injecters there is a brown cap that sits on the injecter nozzle (the part that goes into the intake manifold). I have accidentally broken one of them. Does anyone know if they are necessary? Or can i take them all off and run the car without them?

Pics for reference:
With piece:
Image

Without:
Image
'93 Stroker T-Leg - Weisco forged internals, 440cc gray tops, VF39, '06 TMIC, EJ20G heads & intake manifold, EJ25 phase 1 crank, JDM STi 5-speed mated to 4.11 lsd rear end
kleinkid
Fourth Gear
Posts: 1213
Joined: Fri Jan 24, 2003 3:39 am
Location: Oak Harbor, Washington

Re: gray top injector question

Post by kleinkid »

Remove all the injectors, send them to http://witchhunter.com/

They will clean, flow check, test, all of them, and replace pintel caps(the part you broke) if necessary, and equip with new o-rings.

Answer to your question-- think you need that piece.
2.2TLegacy
First Gear
Posts: 153
Joined: Tue Feb 28, 2012 6:36 pm
Location: Seattle, WA

Re: gray top injector question

Post by 2.2TLegacy »

are the pintel caps available by themselves, say from the dealership?
'93 Stroker T-Leg - Weisco forged internals, 440cc gray tops, VF39, '06 TMIC, EJ20G heads & intake manifold, EJ25 phase 1 crank, JDM STi 5-speed mated to 4.11 lsd rear end
Legacy777
Site Admin
Site Admin
Posts: 27926
Joined: Tue Oct 15, 2002 11:37 am
Location: Houston, Tx
Contact:

Re: gray top injector question

Post by Legacy777 »

No, the dealer won't have just the pintel cap. You can try contacting witchhunter or another fuel injection service place and see if they will sell you just the cap.
Josh

surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT

If you need to get a hold of me please email me rather then pm
Post Reply