Any pics of coolent tank relocation?
Moderators: Helpinators, Moderators
Any pics of coolent tank relocation?
I took out my A/C system while my car's apart and I plan on installing a WRC TM soon. I see that you have to relocate the coolent tank, but I was wondering if anyone has pics and a parts list of what I'll need. Thanks.
-Justin
-Justin
98 LGT
-
- Fourth Gear
- Posts: 1220
- Joined: Mon Oct 21, 2002 9:53 pm
- Location: Ottawa, Ontario, Canada, Now Sioux Lookout
pretty simple, I spliced the 2 major coolant lines (1/2") IIRC with 90 degree brass barbs and hose clamps, got some more tubing and relocated the tank, mounted it using a custom fab bracket. For the two small coolant lines I just shortened them. One comes from the upper rad with a small steel tubing line that runs across the intake manifold. I cut that steel line before it bends and heads off to the old coolant tank located, connected a peice of coolant line and ran it strait to the new tank location. The other small rubber coolant line (which goes into the overflow tank) I just cut and shortened.
The white power steering reservoir is there because the original looked pretty rusty, so I painted it.
Mark,
The white power steering reservoir is there because the original looked pretty rusty, so I painted it.
Mark,
1991 Turbo Sedan, Aspen White 5MT, Sold RIP
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
1994 Turbo Sedan, Crimson Pearl 5MT, from British Columbia-no rust!
-
- Lurker-King
- Posts: 1050
- Joined: Mon Nov 03, 2003 8:36 pm
- Location: Moncton NB Canada
- Contact:

All I did was redo all 4 lines with new longer coolant hose. The bracket is 1/8" bar stock I think. I custom bent it in our vice with a hammer until all the holes lined up for the bolts I put through the existing tank holes. There are multiple compound angles so it took some time... but I got it to line up perfectly.
And oh yeah, I relocated the battery to the trunk, by the way.
1993 WMP BC6 5MT EJ22T 9psi 3.9:1 213k 205/55R16
62.6 m/s @ 0.66 bar. Gotta love boost. :)
62.6 m/s @ 0.66 bar. Gotta love boost. :)
-
- Lurker-King
- Posts: 1050
- Joined: Mon Nov 03, 2003 8:36 pm
- Location: Moncton NB Canada
- Contact:
I've been looking at yours brat, and besides boostjunkies old setup, yours looks like a pretty good idea. Although a lot more work than Jasons was.
Got any tips on battery relocation?
Did you run 2 wires? one for power and one for ground or did you ground on the chassis in the rear and in the front?
Got any tips on battery relocation?
Did you run 2 wires? one for power and one for ground or did you ground on the chassis in the rear and in the front?
R I P-------- 91 Turbo 4EAT --------R I P
It is not that hard at all... I got it done after all
One wire is run to the back. Have a stereo shop do it. They do them all day for stereo systems, and they don't even charge much. Then get a battery relocation kit from summit or something, it's $40 or so (actually this step is 1st). Put everything together and there is a oval plastic cap on the floor of the trunk, underneath is where your bumper rails bolt into the frame. Take the bolt out, clean the area up and put your negative terminal under it and crank it back down. You are done, minus other small details here and there
.

One wire is run to the back. Have a stereo shop do it. They do them all day for stereo systems, and they don't even charge much. Then get a battery relocation kit from summit or something, it's $40 or so (actually this step is 1st). Put everything together and there is a oval plastic cap on the floor of the trunk, underneath is where your bumper rails bolt into the frame. Take the bolt out, clean the area up and put your negative terminal under it and crank it back down. You are done, minus other small details here and there

1993 WMP BC6 5MT EJ22T 9psi 3.9:1 213k 205/55R16
62.6 m/s @ 0.66 bar. Gotta love boost. :)
62.6 m/s @ 0.66 bar. Gotta love boost. :)
-
- Lurker-King
- Posts: 1050
- Joined: Mon Nov 03, 2003 8:36 pm
- Location: Moncton NB Canada
- Contact:
-
- Knowledgeable
- Posts: 1312
- Joined: Wed Oct 16, 2002 10:44 pm
- Location: Northern Sonoma County
- Contact:
-
- Lurker-King
- Posts: 1050
- Joined: Mon Nov 03, 2003 8:36 pm
- Location: Moncton NB Canada
- Contact:
BoostJunkie's old Legacy is the only one I've seen that has just been moved to the right.
http://www.graphics.cornell.edu/~v/pics ... unkie8.jpg
http://www.angelfire.com/md3/91turboleg ... ebay01.jpg
http://www.graphics.cornell.edu/~v/pics ... unkie8.jpg
http://www.angelfire.com/md3/91turboleg ... ebay01.jpg
R I P-------- 91 Turbo 4EAT --------R I P
Legacy
I relocated my coolent tank somewhere else its like South west of the turbo...ill take pictures of it tommorrow if it doesnt rain...I should have them posted by tommorrow night...its not so good of a position but i still have my AC and battery up front...despite the fact that anyway ill be moving my battery to the back.
-
- Knowledgeable
- Posts: 5203
- Joined: Thu Nov 07, 2002 3:59 am
- Location: Cogan Station, PA
I have a thread on here that shows my relocation and I had a write up on it too. I'm pretty sure that when Hardy (Thawa) dropped the gallery that all the pics aren't hosted anymore and won't work. If you PM me your email address I can send you the pics tonight after work.
All my write up thread pics don't work anymore. It's a shame because some of them were pretty informative.....
All my write up thread pics don't work anymore. It's a shame because some of them were pretty informative.....
-Matt
'92 SS 5mt. All go and no show. Sold :(
'94 Audi UrS4 Modded (new project)
'96 Outback 5mt.
'07 Legacy 2.5i SE
[quote="Redlined"]
Oh... and I hope the fucker get bunked with Gunter, arrested for raping Gorillas.[/quote]
'92 SS 5mt. All go and no show. Sold :(
'94 Audi UrS4 Modded (new project)
'96 Outback 5mt.
'07 Legacy 2.5i SE
[quote="Redlined"]
Oh... and I hope the fucker get bunked with Gunter, arrested for raping Gorillas.[/quote]
-
- Fifth Gear
- Posts: 2275
- Joined: Mon Mar 08, 2004 2:30 am
- Location: Auburn, WA
- Contact: