turbo wagon help

cj91legss · Post by **cj91legss** » Sun Nov 24, 2013 5:25 pm

There's no write up. But it's quite simple.

Disconnect the maf, Un tighten the 3 phillips screws on the maf housing, pull sensor out of maf housing, and spray with MAF Sensor cleaner per instructions on the back of the can (You can get this at Schucks, autozone, any other similar parts store.) And re install maf.

ugaucin · Post by **ugaucin** » Mon Nov 25, 2013 3:11 am

Any pictures where it is at? No idea what it is. Sorry I'm a noob.

cj91legss · Post by **cj91legss** » Mon Nov 25, 2013 3:30 am

Silver housing bolted to the airbox...

ugaucin · Post by **ugaucin** » Mon Nov 25, 2013 8:33 am

Alright thanks. Gotta gRt to fixing these things. Need to pass to plate it.

ugaucin · Post by **ugaucin** » Mon Nov 25, 2013 8:12 pm

I tested the maf by unplugging it when the car was on and it died. Doesnt that mean its working right?

ugaucin · Post by **ugaucin** » Mon Nov 25, 2013 10:36 pm

im guessing this is enough to run rich.

robertpaige · Post by **robertpaige** » Thu Nov 28, 2013 4:19 am

Definitely ain't helping. Fix that!

cj91legss · Post by **cj91legss** » Thu Nov 28, 2013 4:36 am

Seriously ^^^ that hose goes to the pcv valve and the vent on the top of the block. That may be your problem.

ugaucin · Post by **ugaucin** » Thu Nov 28, 2013 8:14 am

Id like to thank the previous owners my wagon for all the problems lol. Sorry for the stupid questions. Thanks guys

legacycentral bbs

A forum for 89-94 BC-BF(BJ) Legacy Owners and Fans

turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help

Re: turbo wagon help