10 degree rear spoiler shims
Moderators: Helpinators, Moderators
10 degree rear spoiler shims
Anyone know where I can get 4 10 degree spoiler shims for my 93 legacy? I purchased a spoiler on ebay, went to have it put on and no shims. Kind of stuck between a rock and a hard place because I cant get her painted until I get the spoiler on...thanks
Re: 10 degree rear spoiler shims
Is this for a stock spoiler or aftermarket?
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
-
- Moderator
- Posts: 5000
- Joined: Tue Aug 25, 2009 7:52 am
- Location: Des Moines, Wa
Re: 10 degree rear spoiler shims
I'd imagine a competent machine shop could make a couple shims for you.
1992 Legacy SS 5mt, build in progress
Josh Colombo wrote: ↑Mon Jan 14, 2002 10:23 am Wait....I'm confused now.
Re: 10 degree rear spoiler shims
My ricedar is going off.... why not trim a wood splitting wedge plastic ones are light weight and cheap.
1993 legacy ss "Shela"
Re: 10 degree rear spoiler shims
It is an aftermarket bought on ebay, but the seller failed to tell me it did not have the shims. Now I am scrambling to get shims sot get the spoiler done and get her painted
Help with spoiler shims
OKAY..heres the situation. I bought an aftermarket rear spoiler for my 93 Legacy just for looks, not racing. but it came without shims. I was told I need 10 degree so I started searchin. Found 4, 6, and 8, but no 10. Any ideas of where to get these shims and if I need 10s or not. Now I own a useless new rear spoiler that is holding up my paint job until I get it put on. Any Ideas and thanks again...PS I dont make wood or metal items myself
Re: 10 degree rear spoiler shims
Pooh,
I merged your other thread into this existing thread. No need to post a new thread for the same topic.
Can you post/share pictures of what the 4, 6, or 8 mm shims look like? As Kimo mentioned, you may be able to get a machine shop to make you a set, but having not seen what the spoiler shims look like I couldn't say for certain.
Just a side not for other members, if you don't have any suggestions or help for the original poster, please refrain from posting.
Thanks
I merged your other thread into this existing thread. No need to post a new thread for the same topic.
Can you post/share pictures of what the 4, 6, or 8 mm shims look like? As Kimo mentioned, you may be able to get a machine shop to make you a set, but having not seen what the spoiler shims look like I couldn't say for certain.
Just a side not for other members, if you don't have any suggestions or help for the original poster, please refrain from posting.
Thanks
Josh
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm
surrealmirage.com/subaru
1990 Legacy (AWD, 6MT, & EJ22T Swap)
2020 Outback Limted XT
If you need to get a hold of me please email me rather then pm