Page 1 of 1
Turbo to Tmic intake
Posted: Sat Feb 10, 2007 11:28 pm
by wallgood358
I am looking for suggestions that anyone has used for Ic tubing. The inlet on my Tmic is 1 3/4 in. What is in the diameter of the turbo outlet?
Posted: Sun Feb 11, 2007 2:26 am
by stipro
I think the turbo outlet is 1 1/4" OD. As for the tubing, I used a 90* piece of hose, that increased to 2 1/8 ID, and a piece of 2" copper tube. It works.
Posted: Sun Feb 11, 2007 3:23 am
by wallgood358
so the turbo outlet should be right around the same size? And the IC outlet is 3", is that the same as the Throttle body?
Posted: Sun Feb 11, 2007 5:39 pm
by Threshld1
A wrx TMIC outlet to the throttle body is 2.75" ID not 3". And what turbo are you using? The VF-11 outlet is smaller than a TD04 or TD05. You can see info and pictures on my setup
here
A 1 7/8" ID 90 deg deg hose is the best fit i found between the turbo outlet and the IC Y-pipe. If your running a VF11 size you need something around 1.5" ID