legacycentral bbs

Bump for antilag!

Bump for pics - Plus raceday is coming fast!!!

Of the 3 engine to front harness plugs, 2 square 1 round, I only need the front harness side round plug that plugs into the the engine harness. The topmost plug in the picture. Feel free to supply all three, plugs male and female! If you have them, feel free to cut, just leave enough pigtail to sold...

I'm not familiar with the stampings on this turbo. I was wondering if someone could help identify it. Rumor has it that it was removed from an 'international' truck. I appreciate in advance for the advice I'm about to receive about not being able to spool it. It will not be going on any small displa...

At which point did the triggers change? Just a guess,

• EJ22T Older Trigger waveforms.
  EJ20K non USDM Old Trigger "
  EJ25 Phase 1 Newer trigger?
  EJ205 Obviously 'new trigger'

Can this decode the older Crank can Cam signals on an EJ22T? I know it once ran a MY98RS.

Is this the solution? I didn't have the self shut off connected for months, an then today I decided I'd hook up a few annoying things like the rad fans and coolant AND self shutoff... I took it out for a blast, works great, but after turning it off it wont start. I'll get it sorted out in the mornin...

They are different. Since the pinion of the rear diff lies in the center of the car, the crown side of the diff is narrow, making one driveshaft SHORTER. My mistake. Sorry.

edit!

Hey I replaced a wheel bearing because I thought it was bearing noise in the RR. After replacing the bearing the noise was the same. Turns out I had a bunch of broken belts in the RR tire. Put on the spare to double check and noise was gone.

BB

go to any junkyard and look around for a 5 speed. Bend over check the rear diff foil sticker for the correct ratiio. If its 3.90, Grab the following parts: Flywheel Clutch Clutch pedal assembly Pressure Plate Transmission Rear Differential & Rear drive shafts (maybe). That should keep you covere...

Bdub wrote:Junk. They aren't worth rebuilding.

A new one can be had for ~$90.

+1

both are located in the transmission. Had a bunch in my hands today. http://i133.photobucket.com/albums/q68/saethreehondas/PC050515.jpg At the far right hand side of the picture is the ring and pinion for the front differential. At the far lower left hand side is the layshaft tip where the center di...

I have an RS tranny I'm mating up to my EJ22T.

Will a '98 RS clutch fit on a stock '94 Turbo flyweel?

Yes I know I need to change clutch types (from pull to push).

Do I need to buy an RS flywheel too?

NA 5MT... I believe you have 4.11 gears. Why would you want to go 3.90? you loose torque, making you car feel slower. Do you often attempt to drive above 120mph? Then why swap? Its possible that there is nothing wrong. However, you may have a weak center diff. Not worth changing unless you feel like...

Well, Ben,

What is your brothers current transmission? We're missing a lot of key information here.

These answered all my questions. Thanks to all.

BB

YESSSSSSSSS!

This is the information I needed!

F26.7 to GND
F26.9 Oil Pressure to dash
F26.10 Thermometer to ECU also to dash.

Excellent. You've been a great help.

BB

The '92 FSM scan shows F26.7 going F45.P6 to C11(B56.11) for calif. But otherwise maybe its just grounded. I just want to be bang on with this harness. I dont have much time for messing about frying ecu's. B58.1 is my TPS ground uncut or un modified by me. I believe you have mistaken F26.2 for F26.7...

I'm just in the process of making a stand alone EJ22T harness out of the stock components but I'm a little hung up on some of the leads on one connector. I've separated the engine/ecu related stuff from the chassis harness, and bypassed the SMJ's. Yes, I'm going to do something with the power supply...

Stock legacy Turbo up-pipe.

3F / maxed stiff rear (10?) in all conditions.

Still have that turbo?

I think the turbo just got that hot because the driver is a crazy turkish guy

correct!!!

And tonight - there were two VF-11's and two td04's all the same colour. No hills involved - but a lot of snow drifting.

BB

Yeah -